Blower Motors
We no longer have a relationship with a parts store. Following a link on this page will take you to Amazon.com to search for it. It may or may not be available depending on availability. This is the best we can do at this time and we hope it helps.
-
904521 Blower Motor
$359.82Blower Motor. 3/4hp, 4 speeds. Used on M1’s. Replaces 903434 & 621806.
-
620699 Blower Motor
$321.401/3 hp blower motor. Often used on MGH, MGB & MAC furnaces with A/C blowers.
-
901375 Blower Motor
$266.15Flat mounting. This is a new substitute for the original 1/5 or 1/8hp motor which is no longer available. 1/5hp 1-speed blower motor. Rotation is counter clockwise when looking from the back of the motor (CCWLE). 115V, 1050 RPM, 4.0 amps, shaft size is 1/2″ x 5-1/2″, housing is 5″ diameter x 3.75″. 2 black wires. Flat 3-leg mounting bracket. If angle mounting is required, use motor 902042. Used on the following heat-only furnaces built prior to July of 1985: MGH-065, MGB-065, MAC-1165, MGH-068, MGB-068, MAC-1168, MGH-075, MGB-075 & MAC-1175. Replaces 326P155, 620164, 6201640, 620-1640, 620820, 620-8200, & 6208200. For units with a/c, look at motor 620699.
-
621710 Blower Motor
$263.383 speed blower motor, 1/3 hp, 1075 RPM, 115V, 6.0A. Shaft size 1/2″ x 4.00″. Housing is 5.5″ diameter x 4″ deep. Wiring is black-high, blue-medium, red-low, browns-capacitor. Rotates counter clockwise when viewing from back of motor (CCWLE). Requires run capacitor 621433 (not included). Replaces 6217100.
-
901377 Blower Motor
$254.78Angled mounting. 1/5hp blower motor, 1075 RPM, 4.00 amps, single speed. Shaft size is 1/2″ x 3.25″, housing is 5-5/8″ diameter x 4.0″. 4.00/370V run cap included. Rotation is counter clockwise when looking from the back of the motor (CCWLE). 3 angle mounted legs. 5KCP39EGK737S. Used on the following heat-only furnaces: MGH-100, MGB-100 & MAC-1199. Replaces 130-D1730, 620822, 6208220 & 620-8220. For units with a/c, look at motor 620699.
-
903433 Blower Motor
$246.87Blower motor, 115V, 1/2hp, 4 speed, 1075 RPM, 7.9A. 1/2″ shaft diameter, 4.5″ long. 5.5″ motor diameter x 4.75″ deep. Includes installed mounting bracket which is 11″ between mounting holes. Used on many M1, M3 furnaces and some residential G-series furnaces. Rotates counter clockwise when viewing from back of motor (CCWLE). Requires run capacitor 622133 (not included). Replaces 621810 & 622081.ÿ
-
902128 Blower Motor
$237.03Blower Motor, 4 speed, 1/2 hp, 7.9 amps, 115V, 1075RPM. CCWLE rotation (counter clockwise lead end). 5-5/8″ diameter x 5″ deep. Shaft size 1/2″ x 4.5″. Includes 6-pin male molex plug. Used on M2 & M3 furnace series. Requires run capacitor 622133 (not included). Wiring: red low, orange med-low, blue med-high, black high, white common, browns run cap. Replaces 621324, 621895, 621999, 622014 & 903808.
-
901374 Blower Motor
$217.20Flat mounting.This is a new substitute for the original 1/12hp motor which is no longer available. 1/10hp 1-speed blower motor. Rotation is counter clockwise when looking from the back of the motor (CCWLE). 115V, 1050 RPM, 2 oil ports, 3.38 amps, shaft size is 1/2″ x 2-3/4″, housing is 5″ diameter x 3.25″. 2 black wires. Flat 3-leg mounting bracket. If angle mounting is required, use motor 901621. Used on the following heat-only furnaces built prior to July of 1985: MGH-045, MGB-045, MAC-1145, MGH-055, MGB-055 & MAC-1155. Replaces 620-8180, 6208180, 620818, 901373 & 9013730. For units with a/c, look at motor 620699.
-
903774 Blower Motor
$212.69115V blower motor, 1/4hp, 3 speed, 1075 RPM, 6.0A. 1/2″ x 2-7/8″ shaft. 5″ diameter X 4″ deep housing. Red wire is low, blue is medium, black is high, brown wires lead to capacitor. Rotates counter clockwise when viewing from back of motor (CCWLE). Requires run capacitor 622133 (not included). Replaces 621887, 622240 & 903432.
-
901875 Blower Motor
$203.90115V blower motor generally used for furnaces with a/c, 4 speed, 1/3 hp, 5.8A, 1105RPM. 1/2″ x 4″ long shaft. Motor measures 5.5″ diameter x 4.5″ deep. Rotation is counter clockwise when looking from the back of the motor (CCWLE). Wiring: black-high, blue-medhi, orange-medlow, red-low, white-common, browns-run caps. Requires run capacitor 622133 (not included). Used on the following furnaces: MGHB, MGBB, MMHB & MMBB. Replaces 621083,6210830 & 620698.
-
901873 Blower Motor
$191.70Blower Motor, 1/5 hp, single speed, 1050 RPM, 6.5A, 115V. 5″ diameter x 4″ deep housing. 1/2″ x 3.5″ shaft. Rotation is counter clockwise when looking from the back of the motor (CCWLE). No run capacitor required. 2 black wires. Used on the following heat-only furnaces: MGHA-066, MGBA-066, MMHA-066, MMBA-066, MGHA-070, MGBA-070, MMHA-070, MMBA-070, MGHA-075, MGBA-075, MMHA-075 & MMBA-075. For units with a/c, look at motor 901875. Replaces 326P203, 621081 & 6210810.
-
901874 Blower Motor
$185.63Blower motor, 1/4 hp, 115V, single speed. 1075 RPM, 6.0A, 42Y frame. Housing 5″ diameter x 4.25″ deep. Shaft size 1/2″ x 3″. Requires run capacitor 622132 (not included). 2 wires for power & 2 brown wires to run cap. Rotates counter clockwise when viewing from back of motor (CCWLE). Used on the following heat-only furnaces: MGHA-077, MGBA-077, MMHA-077, MMBA-077, MGHA-090, MGBA-090, MMHA-090 & MMBA-090. For units with a/c, look at motor 901875. Replaces 621082 & 6210820.
-
901621 Blower Motor
$183.56Angled mounting. This is a new substitute for the original 1/12hp motor which is no longer available. 1/5hp 1-speed 115V blower motor. Rotation is counter clockwise when looking from the back of the motor (CCWLE). 1050 RPM, 4.0 amps, shaft size is 1/2″ x 5.5″ (longer than the original, but that is OK), housing is 5″ diameter x 4.0 long”. 2 black wires, no run cap required. Angled 3-leg mounting bracket. If flat mounting is required, use motor 901374. Used on the following heat-only furnaces built after July of 1985: MGH-045, MGB-045, MAC-1145, MGH-055, MGB-055 & MAC-1155. Replaces 620866, 6208660 & 620-8660. For units with a/c, look at motor 620699
-
901376 Blower Motor
$183.56Angled mounting. This 326 motor is a new substitute for the original 1/8hp 5.5″ diameter motor which is no longer available. 1/7hp blower motor, 115V, 1050 RPM, 5.20 amps, single speed. Shaft size is 1/2″ x 3″, housing is 5″ diameter x 4″ long. 2 wires. No run cap required. Rotation is counter clockwise when looking from the back of the motor (CCWLE). Used on the following heat-only furnaces: MGH-075, MGB-075 & MAC-1175. Replaces 5KSP39FGW310S, 6208210, 620-8210 & 620821. For units with a/c, look at motor 620699.
-
904502 Blower Motor
$177.753-speed 115V motor used in many CMF & CMF2 furnaces. 1/3HP, 1075RPM, 6.0A, 48Y frame. Shaft size 1/2″ x 4.5″. Housing 5.5″ diameter X 4.25″ deep. Rotation is counter clockwise when looking from the back of the motor (CCWLE). Wiring: black-high, blue-medium, red-low, white-common, brown-run caps. Requires 621433 run cap (not included). Replaces 902127, 621323, 6213230, 622236 & 6222360.ÿ
-
902042 Blower Motor
$170.87Angled mounting. 1/8hp 1-speed blower motor. Rotation is counter clockwise when looking from the back of the motor (CCWLE). 115V, 1050 RPM. 2 black wires. Includes both a straight 3-pin and 6-pin male plug. Angled 3-leg mounting bracket. If flat mounting is required, use motor 901375. Used on the following heat-only furnaces: MGHA-056, MGBA-056, MMHA-056 & MMBA-056. For units with a/c, look at motor 901875. Replaces 105326001, 620867, 6208670, 901622 & 901872.
-
622237 Blower Motor
$99.80Nordyne 3-speed blower motor found in many CMF furnaces that may not use A/C. 115V, 1/4hp, 6.0A. RPM 1075/950/810. Rotation is counter clockwise when looking from the back of the motor (CCWLE). Motor measures 5″ diameter x 4.25″ deep. Shaft size 1/2″ x 4.75″. Wiring: Red-low, blue-medium, black-high, white-common, browns to run cap. Requires run cap 622133 sold separately. Replaces 903807, 621894 & 622237.