I've run across 2 mobile homes already where the plumbing connections got loose when the home was moved. What happened was the connections to the piping got loose and water spilled underneath the sinks and onto the floors.
Is this normally what happens when moving a mobile home - the connections get loose? Or, does it only happen with homes with the gray pipe?
Thanks for your help!
Plumbing connections loosening when moving a mobile home?
Moderators: Greg, Mark, mhrAJ333, JD
- Demolition
- Posts: 176
- Joined: Wed Nov 14, 2007 3:07 am
- Location: Arkansas
- Contact:
Despite the name Mobile Home... they are not meant to be mobile. You buy them, install at the location and they need to stay there.
It is NOT uncommon for piping to wiggle loose. Many places stopped using the grey pvc. They use white pvc that says SCHEDULE 40 (SCHD 40) on the side.
That is what our water company recommends.
It is NOT uncommon for piping to wiggle loose. Many places stopped using the grey pvc. They use white pvc that says SCHEDULE 40 (SCHD 40) on the side.
That is what our water company recommends.
Call Dinwiddie Demolition we'll tear that house right down.
Sweep up every splinter n haul it out of town
Sweep up every splinter n haul it out of town
Are talking about the supply lines or the waste lines? the supply lines should be able to handle some vibration from the road unless they have been changed by a homeowner. the wast lines may come loose. It is always best to check them before turning the water on and again after. Greg
"If I can't fix it, I can screw it up so bad no one else can either."
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Black pipe unable to use shark teeth connections
by RickW » Sun Sep 02, 2018 12:45 am » in Mobile Home Repair - 6 Replies
- 13787 Views
-
Last post by RickW
Sun Sep 02, 2018 3:25 pm
-
-
- 2 Replies
- 4050 Views
-
Last post by Greg
Mon Jun 12, 2017 7:46 pm
-
- 2 Replies
- 24535 Views
-
Last post by Mark440
Tue Mar 03, 2020 8:35 pm
-
- 6 Replies
- 66766 Views
-
Last post by Greg
Sat Jun 17, 2017 3:12 pm
-
- 7 Replies
- 75529 Views
-
Last post by Greg
Sun Aug 13, 2017 7:59 am