Soundproofing a wall

Post all other heating and cooling questions here.

Moderators: Greg, Mark

Locked
Maineman
Posts: 14
Joined: Tue Mar 06, 2007 10:14 pm

Wed May 16, 2007 4:15 pm

My wife is sensitive to noise. Our heater is on the otherside of our bedroom wall and mt wife hears it when the blower comes on.

We are remodelling now and was thinking of adding some bat insulation (not faced) between the studs and then covering them with plastic. This should work and should not trap moisture.

Any comments?

Thanks


User avatar
Harry
Posts: 1249
Joined: Mon Feb 26, 2007 7:45 pm
Location: Citrus county Florida

Wed May 16, 2007 4:32 pm

Hi

I'm betting the added insulation will dampen the noise somewhat but will not eliminate it.

We removed our furnace and installed a HVAC package unit with heat strips. We have zero furnace noise in the master bedroom now.

Harry
Aside from the roof leak, soft floors, rats, mice and bursted plumbing ........ how do you like it?

User avatar
Yanita
Moderator
Posts: 3369
Joined: Sat Feb 17, 2007 10:16 pm
Location: Eastern N. Carolina

Wed May 16, 2007 7:13 pm

Hi,

If you post this in the Heating and Cooling forum Robert, our tech will gladly advise on what is safe and sound....

Actually I can just move it for you! :lol: Almost forgot I could do that. Follow me there.

~Yanita~
The difference between success and failure is who gives up first!

User avatar
Greg
Moderator
Posts: 5685
Joined: Wed Feb 28, 2007 8:01 pm
Location: Weedsport, NY
Contact:

Wed May 16, 2007 7:17 pm

You can also add a second layer of sheetrock seperated by a 2x2. That creates dead air air space that helps absorb sound. Greg
"If I can't fix it, I can screw it up so bad no one else can either."

User avatar
Robert
Moderator
Posts: 6413
Joined: Wed Feb 28, 2007 12:07 am
Location: Tennessee

Wed May 16, 2007 10:10 pm

Hi,

All of above will help as long you ensure anything near furnace is fire retardant.

Take care and best wishes,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?


PennylessZ28

Wed May 16, 2007 10:45 pm

What about DynoMat ?

http://www.dynomat.com/public/sound-proofing.html

I've seen it used in high end home theater rooms, and I used it in the Trans Am.....

User avatar
Jaie
Posts: 91
Joined: Wed Mar 14, 2007 9:32 pm
Location: Oswego NY

Thu May 17, 2007 11:50 am

I also like Homasote. You usually see it in art studios since it can be pinned. But it's a green product, and older than most green products out there which I love. I suggest putting it between your studs then covering with either paneling or if you can, the thinner sheet rock. One layer will sound proof, (I've heard of it being used to fill an old door area and being more sound proof than the adjacent plaster) and it's cheap.

http://www.homasote.com/nch.html

Locked