Blower is squealing

Questions about repairs and parts for Nordyne furnaces, air conditioners and heat pumps for manufactured homes including Intertherm, Mac and Miller brands. Click here for Nordyne parts.

Moderators: Greg, Mark

Locked
oldtimer
Posts: 61
Joined: Mon Dec 12, 2011 12:02 pm
Location: Jefferson City Missouri

Sun Mar 24, 2013 5:28 pm

I have a E2EH012HA Furnace. The blower is starting to squeal after running about 5 minutes.
Is there a belt that needs replacing or something else.Is there an oil hole to squirt some oil into it ?
I am going replace the sequencer on the 1st when I get my check.
Thanks
God Bless +
Thank you
God Bless


DaleM
Posts: 385
Joined: Wed Apr 07, 2010 10:07 am

Tue Mar 26, 2013 8:33 pm

No belt, it is direct drive. From your othr post about cleaning the blower. It's okay to remove the blower motor and wheel from the blower housing but don't disassemble the motor. It's a motor with sealed bearings....NO oiling ports. Nothing you can do to the bearings to revive them. Replace the motor.

oldtimer
Posts: 61
Joined: Mon Dec 12, 2011 12:02 pm
Location: Jefferson City Missouri

Wed Mar 27, 2013 7:38 am

I did take the motor apart too ( before I saw yer post ) . The bearings are sealed but with the shaft all the way out I can see inside a little gap or seam so I squirted some 3in1 oil in both sides and put it back together and it's working great for two days now ..
Thanks
God Bless +
Thank you
God Bless

DaleM
Posts: 385
Joined: Wed Apr 07, 2010 10:07 am

Thu Mar 28, 2013 9:29 am

I have disassembled some motors and have done that as well but only in a pinch and ONLY until I could get a new motor for my customer. Keep in mind I am a mobile/manufactured home contractor and have to keep my customers happy. Callbacks are no good.

In your case, since it is your motor, if it fails anytime soon there is no one to blame but yourself, I hope it works flawlessly for you for many years to come.

User avatar
flcruising
Posts: 606
Joined: Mon Dec 03, 2007 2:18 pm
Location: Florida Panhandle

Thu Apr 04, 2013 1:40 pm

I would have oiled it too, though I use a heavy weight oil instead of 3-in-water. I keep synthetic gear oil around for moving things that get squeaky.
[color=blue]Aaron[/color]

Locked