intertherm blower issue

Questions about repairs and parts for Nordyne furnaces, air conditioners and heat pumps for manufactured homes including Intertherm, Mac and Miller brands. Click here for Nordyne parts.

Moderators: Greg, Mark

Locked
unitedman
Posts: 1
Joined: Sat Oct 01, 2011 7:44 pm

intertherm blower issue

Post by unitedman » Sat Oct 01, 2011 7:53 pm

I have an intertherm gas furnace, the blower motor is having some issues. When the thermostat demands heat from the furnace it kicks on and works as it should.

But when the house is warm, warmer than the thermostat asks, it will not cycle the air. It used to do this but it has stopped doing it. Any ideas.
im having issues finding a diagram for this furnace model #g5rao72c-12.

thanks


User avatar
JD
Site Admin
Posts: 2690
Joined: Sun Feb 25, 2007 11:57 pm
Location: Fresno, CA
Contact:

Re: intertherm blower issue

Post by JD » Sun Oct 02, 2011 6:51 pm

We need to move your topic to the Nordyne Service & Repair forum. Here's a link. https://www.mobilehomerepair.com/phpbb/viewforum.php?f=2
☯JD♫
Today is PERFECT!

All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.

homebuff
Posts: 325
Joined: Sun Mar 18, 2007 8:38 am
Location: sallisaw, okla. 74955
Contact:

Re: intertherm blower issue

Post by homebuff » Fri Oct 07, 2011 5:33 am

:) Sounds as though it may have a limit switch concern.
Has happened to my simiiar model in the past & fixed it.
Good luck! :)
I am a certified ford diesel tech, "Retired Now" Ford Parts Department counter man, computer consultant, repairman & programmer

homebuff
Posts: 325
Joined: Sun Mar 18, 2007 8:38 am
Location: sallisaw, okla. 74955
Contact:

Re: intertherm blower issue

Post by homebuff » Fri Oct 07, 2011 5:36 am

homebuff wrote::) Sounds as though it may have a limit switch concern.
Has happened to my simiiar model in the past & fixed it.
Good luck! :)
Need to know what type of thermostat your using as well.
Standard or digital programmable or non-programmable.
I am a certified ford diesel tech, "Retired Now" Ford Parts Department counter man, computer consultant, repairman & programmer

Locked