thanks for that...however i live so far out of the way that this was the only guy even close the rest are over 80 miles away just trying to save that hefty service call milage charge ..need to figure out something else

we replaced the electric furnace in november 2012 with a revolve model EB17D and it worked very well for heat only.previously had coleman a presidential mfg. 1990 when home was new it is now time for a/c the tech came and installed the a coil and told me he is not getting 24volts at compressor . the...

resolved ...thanks now have heat AND a very healthy blower ...WOW

i have decided just to scrap it as its 22 years old and has been giving so many problems ...i have purchased a revolv model eb17d ..and have now removed the old one and in process of installing new .....however the new one has circut breakers and im not so sure on where to put the wires ...on old on...

yes i have 2 wire ...and it is set to heat...and the ac is set at front panel of unit .....newest problem is now the ac is no longer needed ....have heat set to work...... the elements are heating when blower is not running .. when call is sent for heat it clicks then blower runs until the desired t...

bump......

hello, i have a coleman presidential model # 3500A816 serial #059171895..i have the add on ac..it has been working flawlessly then this morn it got very hot in here.i pulled cover and the a coil was cold ...and.... the heat coils were bright red .....i have disconnected the power to all the relays t...

the correct sequencer arrived today!! THANKS ABERDEEN ! i installed it ..all is well!! seems to be working correctly. just a note about the blower does work on both heat and ac . the parts person at aberdeen told me it is a smaller HP blowerso i will wait to see if it needs my old one reinstalled. a...

thanks for that info on the heat only blower ...i changed mine for the salvge one and will re install mine .id order a sequencer part 3120A3571...yes it arrived PROMTLY and I made a large mistake i had mark on the phone he gave me the correct part 3 which is 3115A3571 then i clicked the incorrect pa...

thanks again i have gotten a harness ,control box,and blower assy from a old trailer nearby ... i cleaned the blower assy and then removed mine the part # are not same the new one3500-590 has no capacitator old one 3500-6901does have capacitator. i have hooked all up and do have heat and ac however ...

Robert, thank you for your quick reply .the thing is the harness plugs had moisture from a dripping a coil and shorted last year so i bypassed plugs and wired direct had no issues until now with heat or ac . do you know if i can get just the 2 plugs with enough wire to hook into the existing wires?i...

hello, i have a coleman model 3500 A816 and am now trying to get the heat working for winter i had some issues early in year with ac not cycling on /off properly and ordered the reversing relay installed it and it worked correctly all season.... now upon switching front of unit to heat /auto the ele...