will do..thanks so much again

will this be the one on the left or the right when looking at the furnace..thanks again

can you give me the part number for the booster realy...thanks again

Dale
yes there is an Acoil on this unit..i will check and clean them if needed..can you give me the part number for the reley i need...thanks again

scott

hey guys.. this is a goofy one..when im home all day my furnace seems to run okay except the fact the booster motor sometimes stays running after the furnace shuts down.(if i tap on the furnace the booster motor shuts off) today i go home at lunch and the blower is running (cold air ) coming out..i ...

hey robert...i ended up replacing the ignition control...furnace seems to work fine with the exception of the exhausat motor continuing to run after the furnace shuts down.??any ideas what this can mean...thanks again

hi Robert
okay..limit switch is in and still acting up...now the glow plug will come on for 2 seconds and go out,,come on again real quick but then go out again.??i hear it clicking in the ignition control,..do you think the ignition control or the sequencers are bad.???

hey Robert,, installed new valve,,still wouldnt fire..called a buddy @ g.w berkhimer and he had me tape together the wires on the highlimit switch..furnace fired and is running fine..can you give me the part # for that switch..it is the one closest to the combustion motor...thanks again..hopefully y...

okay i had my furnace guy come and check my gas valve pressure..had 11 lbs going in and 7 lbs coming out..bout a new valve for $65 going to install it today...hopefully that solves this lil problem..thanks again rober..youve been a tremndous help

okay,,when the furnace kicks on the glow plug lights..there is a delay then i hear the click for the gas valve.? yesterday it wouldnt fire after the click..it seems when i tap on the gas valve it fires.? also if the glow plug stays energized for to long what can that mean.? by checking the burner or...

my furnace has fired now..seems to be an intermintent problem..still would like to know what you think...also the glow pug stays on while the furnace is running...is this correct..thanks again

hey Robert
seem to have another problem..the furnace will start up and the glow plug will come on..but the furnace will not fire..blowing nothing but cold air..any ideas..please hekp..thanks

that seemed to do the trick..thanks again for your help...

scott martin..

okay. i have ordered the parts.. i will let you know how it goes once they arrive and i install them..
again..thanks for your help

okay.i will order that switch and awap that out ..also i noticed that the upper limit swith (with the manual reset button) is all corrodid and stuck..do you recomend i change that out as well.? thank you for all you help..