Is there such a thing as a linked switch for a bathroom fan that trips on like breaker when the house thermostat is switch to the fan mode? I have this switch and haven't torn into it, I was noticing the other day the fan was on in the bathroom. I went to shut it of, and the switch just kept trippin...

I have found nothing that will work

Hi All- During my remodel I have managed to loose the Vinyl Molding that goes around the 1/4" drywall cover for the hot water tank closet. I have search high and low at the home stores, google has failed me. Does anyone know where I can get some? Or have any ideas or a work around for the 1/4 d...

We ended up just spraying it, and then back rolled.

I prep'd the outside for paint today and was wondering if I should spray or maybe roll the outside? With spaying the masking will take about as long as the painting, not to mention over spray and using more paint. The siding is not a deep groove T-111, but there is about and 1/8 groove for sure. I a...

Thanks Greg, She gets leveled tomorrow! Then the day a new roof. I will go see what the home depot has to offer tomorrow.

Hi All- Since I am new to mobile home remodeling, I am bound to make mistakes. Fear not, I did. The interior doors in our mobile were crap, so I ripped them out. I figured I would just buy new prehung ones and install them. That is when I got my education. It appears that everyone and their brother ...

Hi All- I thought I would make a new post on my drama. :( While replacing my rotten floors it is becoming clear that unfortunately I will need to replace the particle board underneath the Wall studs. The Particle board is soaking wet, and does not see to dry thus it must be replaced. But how is the ...

Can I just drill a hole in the floor and run the new PEX through to the hot water tank? Toilet? Is that code?? It's probably a stupid question, as that is what they did with the CPVC, but I like to do things properly and just want to make sure.

I have a bunch of Underbelly,walls, and floors open on my Project. I had to fix a leaky shower pipe, and replace the flooring where the Hot Water tank was. Most of the pipe is 1996 CPVC pipe. While I dont want to create more work for myself, would it be wise to replace it? I think a lot of it is get...

Greg wrote:About the ONLY thing particle board is good for is filling dumpsters!!!

Greg

After mining a bunch of that nasty stuff out, I tend to agree with you Greg!

All- First and foremost, thank you so much for all the advice I am getting here. I cant tell you how much I appreciate it! I will just suck it up and remove all the insulation, and replace. Unfortunately for you all, I am stumped on a few issues and have more questions. 1. for a newbie, what would b...

What about using Spray foam insulation. Could one use that?

Thanks Greg- I went down and slit the underbelly in a few places yesterday and got rained on. I will let it dry for a few days while I look for a contractor to replace it. That may be me, but we'll see what I can dig up. 1987Commodore - I am very suspicious of this. I need to demo the front deck whi...

Hi all- Long story short, I bought a mobile for a rehab. My agent was an "Mobile Home Expert" and inspected the mobile. said all looked good. I know....I know.... Anyway.. Here is what is happening. Apparently the roof was leaking ( LOTS OF MOSS ON IT.) Water must have been damming on the ...