Posted: Tue Mar 10, 2009 1:17 pm Post subject:
--------------------------------------------------------------------------------
Hi,
Just the blower running wouldn't run up the electric bill a whole lot, so you must also have one element not turning off either. To fix this, replace the sequencer. For your furnace, that is part number 3115-3571. It can be seen and ordered on this page of our website: http://www.mobilehomerepair.com/ColemanElec.html
Thanks,
Mark
Mark,
I installed the sequencer as suggested. The blower still runs continuously. I have to kick the unit off at the breaker. Any other suggestions??
First suggestion didn't help -- any others??Coleman EB15B
This is the exact problem we have. Blower runs continuously. It will only shut of with the breaker. The blower started doing this right after we had a cold spell and had to use the heat for just an hour or so one morning. The home temperature is fine. The blower is just annoying. I saw in another post that the sequencer is used with the heat. What controls the blower when using the A/C? What could we check besides the sequencer? We have already changed the t-stat.
Thank you.
Coleman Evcon EB15B
Thank you.
Coleman Evcon EB15B
Hi,
Please start a new thread with your questions to keep these separate and easier to follow.
I will answer then and give info needed.
Thanks for kind words on the site.
Thanks,
Robert
Please start a new thread with your questions to keep these separate and easier to follow.
I will answer then and give info needed.
Thanks for kind words on the site.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
EB15B Limit switch part # help
by ferret13sj » Thu Jan 18, 2018 11:46 pm » in Coleman Service & Repair - 0 Replies
- 40209 Views
-
Last post by ferret13sj
Thu Jan 18, 2018 11:46 pm
-
-
-
Coleman 6806a furnace doesn't stop heating even with tstat disconnected. Any ideas?
by Neighbor Bill » Mon Dec 31, 2018 1:01 pm » in Coleman Service & Repair - 1 Replies
- 31937 Views
-
Last post by Neighbor Bill
Mon Dec 31, 2018 1:06 pm
-
-
-
Leveled my first manufactured home, but the end is high
by novasbc1024 » Mon Oct 08, 2018 7:20 pm » in Mobile Home Repair - 3 Replies
- 43945 Views
-
Last post by novasbc1024
Fri Oct 12, 2018 4:51 pm
-
-
-
Ducts barely blowing - what to check first?
by caligirl » Fri Nov 25, 2022 1:21 pm » in All Other HVAC Questions - 0 Replies
- 90905 Views
-
Last post by caligirl
Fri Nov 25, 2022 1:21 pm
-
-
- 2 Replies
- 50243 Views
-
Last post by jazsimpson
Sat Jul 08, 2017 8:16 am