Important Information About Our Parts Store!
- - They are well known industry experts in mobile home repair.
- - They ship orders same day in most cases.
- - They have been helping people across the country with mobile home repair for nearly 20 years.
- - They are willing to help you both before and after the sale with installation, troubleshooting, and part selection.
- - They offer an 12 month exchange warranty
- - They do not charge a restocking fee on returns.
- - They are readily available by phone (605-229-2627) and email ([email protected]).
- - They know enough about many parts to build them from scratch if they are no longer made.
- - They are a great family run business that takes care of their customers.
Can not find what you are looking for? You can visit Aberdeen Home Repair and search for thousands more mobile home parts. Alternatively you can visit Mobile Home Parts Store for even more options.
- Blower Assemblies
- Blower Motors
- Blower Wheels
- Booster Motors
- Burner & Pilot Parts
- Control Boards & Modules
- Fan & Limit Switches
- Flame Sensors & Ignitors
- Gas Valves
- Pressure Switches
- Run Capacitors
- Wiring Harnesses
Ignitor. Ignitor glows to light flame on burner. Do not touch with bare hands while installing. Replaces 632077, 632088 & 105141000. Was $63.11.
0122-1012 Olympian flexible gas lighter 26″$55.38
26″ long professional butane pilot lighter. Flame never blows out. 15″ flexible tip plus 11″ handle. Refillable, adjustable flame, safety lock, uses one AA battery (included). Great for lighting furnaces, water heaters, grills, fireplaces, candles, lanterns, etc.
78075 Manometer Gas Pressure Gauge$51.50
Manometer is a tool for checking gas pressure. Measures from -2 to 15 inches of watercolumn (wc). To operate, shut off furnace and gas. Fill cylinder with water to zero mark. Unscrew cap and connect tube to pressure port on gas valve. Turn on gas and furnace. Adjust pressure according to manufacturer instructions on gas valve. When done, shut off furnace and gas, remove tube from gas valve, screw cap back on pressure port, turn gas and furnace back on. Check for leaks.
632427R Pressure Switch.$49.70
Pressure switch. NO, 0.55C. 1 hose nipple. Also referred to as a combustion air switch or draft proving switch. Switch closes when the combustion/booster motor runs creating a negative air pressure. For replacement tubing, order part # B13-614. Replaces 632212, 6322120, 632124, 6321240, 632385 & 632427.
Ignitor with adapters & wires. Ignitor leads are 9-10″ long. Ignitor glows to light flame on burner. It’s also a flame sensor and will send signal to control board to shut down furnace if no flame is detected. Measures 3″ long. Wire ends snap inside plugs. Do not touch with bare hands.
632426R Pressure Switch$48.49
Pressure switch. NO, 0.58C. Also referred to as a combustion air switch or draft proving switch. Switch closes when the combustion/booster motor runs creating a negative air pressure. For replacement tubing, order part # B13-614. Replaces 632409 & 632426.
Ignitor. This ignitor has been redesigned. It looks different, but the new design installs the same and will have a much longer life. Ignitor glows to light flame on burner. It’s also a flame sensor and will send signal to control board to shut down furnace if no flame is detected. Replaces 903110, 632313 & 632313c. Was $52.62,
1014531 Pressure Switch.$44.40
Also referred to as a combustion air switch or draft proving switch. Closes at -0.20″ of wc when the combustion/booster motor is running. Please note that this is the replacement for the 632332. We realize that it don’t look the same, and that the plug on some wires may need reworked, and that the wc is not -0.35″. However, Nordyne says this is the replacement as the 632332 is no longer manufactured. For replacement tubing, order part # B13-614. Replaces 632332, 6323320, 632453R, 922486, & 632453.
Venturi used in CMF80 and CMF100 direct ignition gas burners. Replaces 356340, 375090 & 375090R.
264880R Air Tube$42.81
Air tube used in CMF80 and CMF100 direct ignition gas burners. Inner tube measures 3-7/8″ x 7″ long. Flange measures approximately 6″ diameter with 3 mounting holes. Replaces 264880.
208-240V X 24V @ 30VA Class 2 transformer. Installs in Nordyne central air conditioner condenser sections. Includes removable wire l eads. Replaces 620455.
Ignitor with plug. Ignitor is 3″ long. Wire leads are 9-10″ long. Ends of wire fit inside plug. Ignitor glows to light flame on burner. It’s also a flame sensor and will send signal to control board to shut down furnace if no flame is detected. Do not touch with bare hands while installing. Replaces 632140, 632202, 632250, 902379 & 902661. Was $51.86,
272471 wiring harness$39.00
Set of wires and plugs for the M3 & M3RL series furnace.
Transformer. 120 volt input (load), 24 volt output (line). 30VA, 50/60HZ. Replaces 621098.
305161000 Flame Detector$35.39
Flame detector cell. Generally found on Miller furnaces. Replaces 626168.
632092R Toggle Switch$33.26
DPDT toggle switch. On-Off-Auto. 6 terminals on back. Face of switch measures 1″ x 1.25″. Replaces 632092.
Transformer. 120 volt input (load), 24 volt output (line). 20VA, 50/60HZ. Used in many Mac & Miller furnaces. Replaces 6200090, 660189, 620825, 104379000, 104933000 & 302993000.
903992 4-5 Wire Thermostat.$31.91
Heating and cooling wall thermostat for standard 4-5 wire systems. Use with gas, oil or electric Nordyne/Intertherm furnaces. Features sleek modern look. Replaces 904153, 914153, 914154, 914510, 914511 & others.