Nordyne Gas Furnace Parts
We no longer have a relationship with a parts store. Following a link on this page will take you to Amazon.com to search for it. It may or may not be available depending on availability. This is the best we can do at this time and we hope it helps.
Categories
- Blower Assemblies
- Blower Motors
- Blower Wheels
- Booster Motors
- Burner & Pilot Parts
- Control Boards & Modules
- Fan & Limit Switches
- Flame Sensors & Ignitors
- Gas Valves
- Pressure Switches
- Relays
- Run Capacitors
- Switches
- Thermostats
- Transformers
- Wiring Harnesses
-
901875 Blower Motor
$203.90115V blower motor generally used for furnaces with a/c, 4 speed, 1/3 hp, 5.8A, 1105RPM. 1/2″ x 4″ long shaft. Motor measures 5.5″ diameter x 4.5″ deep. Rotation is counter clockwise when looking from the back of the motor (CCWLE). Wiring: black-high, blue-medhi, orange-medlow, red-low, white-common, browns-run caps. Requires run capacitor 622133 (not included). Used on the following furnaces: MGHB, MGBB, MMHB & MMBB. Replaces 621083,6210830 & 620698.
-
720-079 Universal Elec Gas Valve.
$193.16Universal gas valve for furnaces with intermittent pilot, hot surface or direct spark ignition. Does not work with continuous pilot. Does not replace smart valves. Comes set to Natural Gas but is convertible to propane (LP). Be sure to replace burner orifices when converting. Manometer needed to set the LP pressure. Features a 1/2″ back and side inlet, 1/2″ front and 3/4″ side outlet. Full wave (full open). Seal the unused inlet & outlet with the included 2 plugs. Also includes 1 bushings to reduce 3/4″ outlet to 1/2″. 24V.
-
901873 Blower Motor
$191.70Blower Motor, 1/5 hp, single speed, 1050 RPM, 6.5A, 115V. 5″ diameter x 4″ deep housing. 1/2″ x 3.5″ shaft. Rotation is counter clockwise when looking from the back of the motor (CCWLE). No run capacitor required. 2 black wires. Used on the following heat-only furnaces: MGHA-066, MGBA-066, MMHA-066, MMBA-066, MGHA-070, MGBA-070, MMHA-070, MMBA-070, MGHA-075, MGBA-075, MMHA-075 & MMBA-075. For units with a/c, look at motor 901875. Replaces 326P203, 621081 & 6210810.
-
624583R Gas Valve
$191.45Robertshaw 7200ERCS-1 gas valve for many Nordyne furnaces with a pilot light. May not look anything like your old gas valve. 1/2″ gasline inlet on the left, 3/8″ outlet on the back. Comes set for natural gas. To convert to propane (LP), simple unscrew cap marked ‘NAT’, flip over and screw back down so ‘LP’ shows on the cap. Also be sure to change your burner orifices when converting. A new 632183 thermocouple is recommended (sold separately). 7C7-H8F-545. Replaces 624370, 624609, 624466, 624491, 6244913, 624581, 624583, 624583B, 624583C & 624621. Was $243.92.
-
621080 Combustion Blower Motor
$188.23Combustion blower motor with centrifugal switch. Brings air for combustion to the burners. 115V, 1500RPM, .027HP. Centrifugal switch cannot be sold separately.
-
901874 Blower Motor
$185.63Blower motor, 1/4 hp, 115V, single speed. 1075 RPM, 6.0A, 42Y frame. Housing 5″ diameter x 4.25″ deep. Shaft size 1/2″ x 3″. Requires run capacitor 622132 (not included). 2 wires for power & 2 brown wires to run cap. Rotates counter clockwise when viewing from back of motor (CCWLE). Used on the following heat-only furnaces: MGHA-077, MGBA-077, MMHA-077, MMBA-077, MGHA-090, MGBA-090, MMHA-090 & MMBA-090. For units with a/c, look at motor 901875. Replaces 621082 & 6210820.
-
901621 Blower Motor
$183.56Angled mounting. This is a new substitute for the original 1/12hp motor which is no longer available. 1/5hp 1-speed 115V blower motor. Rotation is counter clockwise when looking from the back of the motor (CCWLE). 1050 RPM, 4.0 amps, shaft size is 1/2″ x 5.5″ (longer than the original, but that is OK), housing is 5″ diameter x 4.0 long”. 2 black wires, no run cap required. Angled 3-leg mounting bracket. If flat mounting is required, use motor 901374. Used on the following heat-only furnaces built after July of 1985: MGH-045, MGB-045, MAC-1145, MGH-055, MGB-055 & MAC-1155. Replaces 620866, 6208660 & 620-8660. For units with a/c, look at motor 620699
-
901376 Blower Motor
$183.56Angled mounting. This 326 motor is a new substitute for the original 1/8hp 5.5″ diameter motor which is no longer available. 1/7hp blower motor, 115V, 1050 RPM, 5.20 amps, single speed. Shaft size is 1/2″ x 3″, housing is 5″ diameter x 4″ long. 2 wires. No run cap required. Rotation is counter clockwise when looking from the back of the motor (CCWLE). Used on the following heat-only furnaces: MGH-075, MGB-075 & MAC-1175. Replaces 5KSP39FGW310S, 6208210, 620-8210 & 620821. For units with a/c, look at motor 620699.
-
904502 Blower Motor
$177.753-speed 115V motor used in many CMF & CMF2 furnaces. 1/3HP, 1075RPM, 6.0A, 48Y frame. Shaft size 1/2″ x 4.5″. Housing 5.5″ diameter X 4.25″ deep. Rotation is counter clockwise when looking from the back of the motor (CCWLE). Wiring: black-high, blue-medium, red-low, white-common, brown-run caps. Requires 621433 run cap (not included). Replaces 902127, 621323, 6213230, 622236 & 6222360.ΓΏ
-
902042 Blower Motor
$170.87Angled mounting. 1/8hp 1-speed blower motor. Rotation is counter clockwise when looking from the back of the motor (CCWLE). 115V, 1050 RPM. 2 black wires. Includes both a straight 3-pin and 6-pin male plug. Angled 3-leg mounting bracket. If flat mounting is required, use motor 901375. Used on the following heat-only furnaces: MGHA-056, MGBA-056, MMHA-056 & MMBA-056. For units with a/c, look at motor 901875. Replaces 105326001, 620867, 6208670, 901622 & 901872.
-
626421R HSI Control
$159.19Hot surface ignition control. Replaces 626333, 6263330, 626421, 626-421, 626-4210, 6264210.
-
903596 Gas Valve M1
$155.78Honeywell VR8205R2091 gas valve with adapters for M1M furnaces with electronic ignition. 1/2″ gasline inlet on the right, 3/8″ outlet on the back left. LP or natural gas. Includes bracket and kit to convert from a Robertshaw valve. Comes set for natural gas. Gas valve may be turned for side mounting. To convert to propane (LP), simple unscrew cap marked ‘NAT’, flip over and screw back down so ‘LP’ shows on the cap. Also be sure to change your burner orifices.
-
903429 Integrated Control Board
$148.98Integrated UTECH circuit board for M1M furnaces. For a spare or replacement fuse, order 3A fuse G32-189 found below. Replaces 624602, 6246020, 624602-0, 624602A, 624602B & 624640.
-
626436R fan & limit control.
$147.70Honeywell fan and limit control. 120 or 240 volts. Button that says push for manual or pull for auto. Remove cover to manually adjust settings. Probe is 5″ long. Box size is 4.25″ X 3″ X 1-5/8″. Found on many CMF furnaces. Replaces 306039001 & 626436.
-
624610R Gas Valve.
$146.39Honeywell VR8205R2091 gas valve for many Nordyne M-series furnaces with hot surface igntion. 1/2″ gasline inlet on the right, 1/2″ outlet on the left. Gas valve may be turned for side mounting. Comes set for natural gas. To convert to propane (LP), simple unscrew cap marked ‘NAT’, flip over and screw back down so ‘LP’ shows on the cap. Also be sure to change your burner orifices when converting. Replaces 624610.
-
904478 Burner Motor
$125.61Gas gun motor used in many Miller standing pilot and direction ignition burners in M1 & CMF series including CMF65-PG-DI, CMF80-PG-DI & CMF100-PG-DI. 115V, 3000RPM, .78A. Includes brackets. Shaft size 5/16″ x 1″. Motor housing is 3.25″ diameter x 6″ long. Replaces 621077, 622065 & 104385000.
-
904081 Gas Valve
$116.78Honeywell VR8205S2288 gas valve. 24V. Comes set for NG, but includes kit for converting to LP. 1/2″ gasline inlet on the right, 1/2″ outlet on the left. Gas valve may be turned for side mounting. For conversion to propane (LP), order kit 396221. To convert to NG, order kit 396222. Be sure to change burner orifices when converting. Replaces 624506, 624560 624646, & 624586.
-
622237 Blower Motor
$99.80Nordyne 3-speed blower motor found in many CMF furnaces that may not use A/C. 115V, 1/4hp, 6.0A. RPM 1075/950/810. Rotation is counter clockwise when looking from the back of the motor (CCWLE). Motor measures 5″ diameter x 4.25″ deep. Shaft size 1/2″ x 4.75″. Wiring: Red-low, blue-medium, black-high, white-common, browns to run cap. Requires run cap 622133 sold separately. Replaces 903807, 621894 & 622237.