Page 1 of 1

Conversion to LP

Posted: Thu Dec 01, 2011 6:55 pm
by rivrman2
Colman model DGAA07BDTA
Can someone give me instructions to con from Natural gas to LP?

Re: Conversion to LP

Posted: Wed Dec 07, 2011 10:47 pm
by rythmo
You will need a new orifice for LP based on the furnace's btu design and your elevation. You will also need a manometer to verify and adjust the gas pressure. LP uses a bigger orifice and higher pressure. Contact a Coleman dealer for the right orifice. Manometers available online