intertherm feh-012ha element cycles on and off with stat off
-
- Posts: 1
- Joined: Sat Feb 12, 2011 3:44 pm
i just bought mobile home and when i opened furnace i had notice fuses blown! i replaced fuses, and put new sequncer and transformer in unit! the furnace comes on and off as should with thermostat! but once it heats to thermostat temp the blower turns off but every few min the bottom element comes on for few sec and goes back out and does this as long as breaker is in unit! im sure this is not supose to happen! i took the blower off and unhooked thermostat and the lower element comes on for about 3 sec and turns back off, bout 2 to 3 min does it again, so on and so forth! please help!!
Hi Jeremy,
Remove the blower assembly from furnace and look inside down at the elements. See if the element that keeps coming on has fallen or broken and touching frame or other coils.
Thanks,
Robert
Remove the blower assembly from furnace and look inside down at the elements. See if the element that keeps coming on has fallen or broken and touching frame or other coils.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
have intertherm heat pump with a 913421 control box tying to a miller 841 thermo stat ,
by hillcat01 » Mon Oct 21, 2019 7:28 pm » in Nordyne Service & Repair - 0 Replies
- 82794 Views
-
Last post by hillcat01
Mon Oct 21, 2019 7:28 pm
-
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 159351 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
-
Intertherm FEH-017HAC won't shut off
by Jetherid » Mon Dec 07, 2020 6:22 pm » in Nordyne Service & Repair - 0 Replies
- 166597 Views
-
Last post by Jetherid
Mon Dec 07, 2020 6:22 pm
-
-
- 0 Replies
- 74901 Views
-
Last post by newguy47
Thu Aug 16, 2018 8:21 pm
-
-
heater blower intertherm feh-015ha-03
by newguy47 » Wed Oct 24, 2018 8:04 am » in Nordyne Service & Repair - 0 Replies
- 81165 Views
-
Last post by newguy47
Wed Oct 24, 2018 8:04 am
-