Page 1 of 1

M1M ignitor ?

Posted: Thu Dec 16, 2010 8:54 pm
by JohnnyBaker
I have a nordyne (intertherm) M1MB. The red light is steady at first and you can hear the unit trying to light (click). After doing this a few times, red light blinks 4x, lockout due to failed ignition. The yellow flame light never comes on. Ignitor is bad? Can I change it myself? Where do I get the part? Thanks for any help you can offer. I opened the little hatch and see no flame or anything glowing at all.

Re: M1M ignitor ?

Posted: Fri Dec 17, 2010 4:57 pm
by Robert
With a call for heat, see if you ever get 120vac to the ignitor wires.


Thanks,
Robert

Re: M1M ignitor ?

Posted: Fri Dec 17, 2010 7:31 pm
by JohnnyBaker
Yes, I do get 120v when it calls for heat.

Re: M1M ignitor ?

Posted: Fri Dec 17, 2010 8:38 pm
by JohnnyBaker
And, I can't find a part# anywhere.

Re: M1M ignitor ?

Posted: Sat Dec 18, 2010 1:30 am
by Robert
What is the full model number ?


Thanks,
Robert

Re: M1M ignitor ?

Posted: Sat Dec 18, 2010 9:30 am
by JohnnyBaker
M1MB 056A BW. That is the only model # I can find. The ignitor (which I already have out) has a little tag on the wire which reads,
Sic
FC047
0010
Any of this sound correct?
Everything else just says M1M series.

Re: M1M ignitor ?

Posted: Sat Dec 18, 2010 6:18 pm
by Robert
Hi,

Go here to see and order Ignitor # 903110A by paging down to it :

http://www.aberdeenhomerepair.com/store ... esults.php




Thanks,
Robert