Hey,
I have a Central Electric Furnace Intertherm model FEH-010HA
It is making alot of noise here lately any suggestions?
electric furnace blower noisy
-
- Posts: 4
- Joined: Tue Dec 07, 2010 10:21 am
I think the motor is going out...does anyone know where i can get one?
Motor:
Franklin Electric 8715620130
240v 60hv 1050rpm
1/8 hp 1.8a
Motor:
Franklin Electric 8715620130
240v 60hv 1050rpm
1/8 hp 1.8a
-
- Posts: 67
- Joined: Fri Nov 12, 2010 10:45 am
Hard to believe no one has responded to your question. Any electric distributor should have a motor that will replace yours. In my area we have a place called Universal Electric. You need to look for a frame number on the specs label. It will start with FR. That will ensure you get the correct physical size of the motor itself. I have always found it best to take the original motor along to match up with the replacement. Make sure you don't go any lower than the amp rating that is on the original motor. Also make sure the rotation is the same, i.e. cwle (clockwise lead end) or ccwle (counterclockwise lead end). Some universal replacement motors allow for reversible rotation but my experience is that these motors have a shorter life. A longer shaft is not a problem if you have to settle for one of those. Simply use a hacksaw to cut the excess shaft, if necessary, and file away any burrs to allow the blower wheel to slide over the shaft end.
"Man...that blowed up real good!"
Do you have heat only or heat and a/c ?
I had knee surgery Tuesday and have been away from office since.
Thanks,
Robert
I had knee surgery Tuesday and have been away from office since.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Posts: 67
- Joined: Fri Nov 12, 2010 10:45 am
Actually, you should be able to order a replacement motor here. Robert can give you the link.
"Man...that blowed up real good!"
-
- Posts: 4
- Joined: Tue Dec 07, 2010 10:21 am
Hey,
I took it apart and greased it up with some old grease i had laying around and the noise went away for about half the day and came back any suggestions?
I took it apart and greased it up with some old grease i had laying around and the noise went away for about half the day and came back any suggestions?
Hi,
Blower Motor # 902512
Run Capacitor # 622535
Both can be seen and ordered here by paging down :
http://www.aberdeenhomerepair.com/store ... 2512-motor
Then type run cap p/n into search window and add to cart/basket.
Due to cost of replacement motor, you can call Mark @ 605-229-2627 on Monday and see if he has one compatible for a lesser amount.
May or may not, but worth a try. He will need motor diameter and length, shaft diam. and length, motor rpm and hp.
Thanks,
Robert
Blower Motor # 902512
Run Capacitor # 622535
Both can be seen and ordered here by paging down :
http://www.aberdeenhomerepair.com/store ... 2512-motor
Then type run cap p/n into search window and add to cart/basket.
Due to cost of replacement motor, you can call Mark @ 605-229-2627 on Monday and see if he has one compatible for a lesser amount.
May or may not, but worth a try. He will need motor diameter and length, shaft diam. and length, motor rpm and hp.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
intertherm feh-015ha-04 Noisy Blower
by kjaxes99 » Sat Oct 24, 2020 4:45 am » in Nordyne Service & Repair - 0 Replies
- 134892 Views
-
Last post by kjaxes99
Sat Oct 24, 2020 4:45 am
-
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 157886 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
- 3 Replies
- 36060 Views
-
Last post by David DeBord
Sun Oct 22, 2017 8:16 am
-
-
Electric water heater, standard VS. MH specific
by ferret13sj » Thu Aug 26, 2021 3:41 am » in Mobile Home Repair - 4 Replies
- 45298 Views
-
Last post by Sulteric
Sun Sep 05, 2021 9:39 pm
-
-
- 2 Replies
- 56358 Views
-
Last post by jazsimpson
Sat Jul 08, 2017 8:16 am