Coleman Evcon DGAT056BDC

[Cnobinger]

Hi,

I recently replaced an exhaust motor with a X89-684 BST Motor and didn't label my wires or connections. In turn, it burnt out the board for the ignition module when I thought I had wired it properly. I replaced the ignition module and it is wired up correctly. I am 99% sure that I had connected the wires from the motor to the wrong contacts on the same relay in the upper part of the unit. My question is about the motor. It has two black wires and two blue. Is it possible to find out the proper connections before I turn it on and blow another board?

thanks

[Robert]

Hi,

Blue to Limit Switch

Blue to TH on Ignition Module


Black to Common spade of Primary-Line side of transformer

Black to Fan Relay # 4 spade



Thanks,
Robert