mobilehomerepair.com

Hello as to a follow up of my last post with blower not kicking on. I have a american zettler az2280 1c-24a(204) relay I belive that is the issue. But I am having a hard time finding one in orlando florida or online? Can anyone tell me a croos ref part # and diaagram of where to attach mt two lead or/gr & blk? Thanks to all John

Hi John,

Can you post a pic ? Is it a 6 spade terminal relay ?


IF the green and black are from t-stat and transformer (24vac), they would connect to 1 and 3 coil terminals IF it is a 6 terminal fan relay.



Thanks,
Robert

Hello again Robert and thanks as to my last post would this relay stop my blower motor from not working? I have tried to disconnect the wires from stat to by pass and still nothing. After doing that would it be relay or blower motor itself. I can push contactor and compressor kicks on and outdoor fan but not my blower and it spins freely. It is a It's a Miller model # Q3rd-0364 13 seer single package heat pump. It has a 1/2 hp blower motor g.e..Any help would be great thanks again John

Hi,

IF the motor is receiving full voltage, then it is the motor. IF not, then it is a component like a relay or a run capacitor.


Thanks,
Robert