new control board
-
- Posts: 2
- Joined: Mon Feb 15, 2010 5:30 pm
i need information on connecting york universalcircuit board 2702-310a to coleman furnace modelbgu100-16a ser.950366849 Keep getting code 5 flashes indicating open rollout Do I need to make a wiring change somewhere? Thanks Mike
Hi Mike,
There is some wiring changes with those boards, but not in all circumstances. Sometimes it is the need for a different board.
Where did you get the board ?
Could also be a bad flame rollout switch or an actual flame problem.
Thanks,
Robert
There is some wiring changes with those boards, but not in all circumstances. Sometimes it is the need for a different board.
Where did you get the board ?
Could also be a bad flame rollout switch or an actual flame problem.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Posts: 2
- Joined: Mon Feb 15, 2010 5:30 pm
Thank you you your response. I was in the middle on this, trying to help someone out. Anyway I found out that there is a wiring kit needed for it to work. Thanks again. Mike
Hi Mike,
You're very welcome, happy to help. Yes, if you buy the board with different wiring connections, you will need the kit for it to work.
Thanks,
Robert
You're very welcome, happy to help. Yes, if you buy the board with different wiring connections, you will need the kit for it to work.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Posts: 2
- Joined: Mon Mar 01, 2010 7:16 pm
Hi,
I'm installing a new thermostat and I need to know the funtions of the A2 and the RH wires on the Intertherm thermostat.
I'm installing a new thermostat and I need to know the funtions of the A2 and the RH wires on the Intertherm thermostat.
-
- Posts: 2
- Joined: Mon Mar 01, 2010 7:16 pm
If you might know where they would connect on the Honeywell RTH7600 that would be great too.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
I need input on best way to hang new copper or pex pipes from underside mobilehome without opening up belly board
by waitingtohear » Mon Jun 11, 2018 12:21 am » in Mobile Home Repair - 7 Replies
- 87170 Views
-
Last post by waitingtohear
Mon Jul 02, 2018 5:39 pm
-
-
-
New Owner of 73 Viking with rotten Particle Board subfloors
by 73Viking » Thu Nov 08, 2018 9:39 pm » in Mobile Home Repair - 10 Replies
- 39277 Views
-
Last post by Greg
Mon Dec 10, 2018 5:27 pm
-
-
-
have intertherm heat pump with a 913421 control box tying to a miller 841 thermo stat ,
by hillcat01 » Mon Oct 21, 2019 7:28 pm » in Nordyne Service & Repair - 0 Replies
- 83249 Views
-
Last post by hillcat01
Mon Oct 21, 2019 7:28 pm
-
-
-
Help with Nordyne electronic board
by swade1991 » Thu Aug 02, 2018 12:13 pm » in Nordyne Service & Repair - 0 Replies
- 30894 Views
-
Last post by swade1991
Thu Aug 02, 2018 12:13 pm
-
-
- 3 Replies
- 8243 Views
-
Last post by Greg
Mon Oct 01, 2018 6:31 pm