Page 1 of 1

A frame evaporator coils

Posted: Mon Jul 13, 2009 12:14 pm
by ghreds
I cleaned my evaporator coils with foaming cleaner before I found this site and learned that I should have used non-foaming cleaner. My problem is that after thoroughly rinsing the coils, it's still bubbling up underneath the coils when I turn on the ac. All the wiring, electrics and fan are directly underneath the coils and the bubbling is causing the condensation to leak onto everything. Any ideas to get rid of the excess foaming cleaner besides letting the condensation rinse it off?

RE: A frame evaporator coils

Posted: Mon Jul 20, 2009 12:07 am
by Robert
Hi,


Cover electricals with plastic, then use sprayer with water to continue rinsing.


Can use wet/dry vac to help somewhat also.



Thanks,
Robert