Page 1 of 1

New (used) MH furnace

Posted: Tue Mar 03, 2009 10:53 am
by alaskabear99687
Hello, well after months of looking and planning and saving we have one narrowed down and currently in discussions with the owner. The previous owner took the trailer from a 14x70 and added enough on each side to make it a 1700 sq ft of living space. My question is about the furnace; I am assuming that it is the original furnace which at this time should be totally to small for this space. How hard is it to swap for a larger furnace and should I just pay and have a contractor do it? I am mechanically inclined but really don't have the tools after moving several times. FYI it is an oil burner.

RE: New (used) MH furnace

Posted: Tue Mar 03, 2009 10:57 am
by Yanita
Hi,

Welcome to the site.

I am going to move this to the HVAC forums...please follow there. We try to keep all furnace/HVAC questions there.

Yanita

RE: New (used) MH furnace

Posted: Wed Mar 04, 2009 2:30 am
by Robert
Hi,

Short answer is yes, have an hvac tech install it and get enjoyment and safety without hassle/headache of install.


Plus it keeps the warranty and homeowners insurance valid.



Thanks,
Robert