Page 1 of 1
Central Electric Furnace is only blowing cool air.
Posted: Sat Dec 20, 2008 3:58 pm
by jbkeeley84
I have a Central Electric Furnace. The model number - EB17B and the serial number - W0H5698597. The Problem is that is only is blowing cool air. It is a fairly new furnace (less than 5 years) and I cleaned off all the dust I could. I also found stamped inside "Coleman 7681-607" If anyone has any tips or has run into a similar problem and could help that would be great. Thanks - Jonny
RE: Central Electric Furnace is only blowing cool air.
Posted: Mon Dec 22, 2008 12:51 pm
by Robert
Hi Jonny,
Are you getting 240vac across each element coil end terminals ?
Thanks,
Robert
RE: Central Electric Furnace is only blowing cool air.
Posted: Mon Dec 22, 2008 8:27 pm
by jbkeeley84
Hello,
Thanks for you reply to my question. It turns out that it was a bad sequencer. Thanks again for this great site it has helped a lot. - Jonny
RE: Central Electric Furnace is only blowing cool air.
Posted: Tue Dec 23, 2008 3:38 pm
by Robert
You're very welcome, happy to help.
Take care and best wishes,
Robert