Goodman High Altitude Natural Gas Re-Jet
Posted: Thu Nov 06, 2008 2:35 pm
I need to re-jet a Goodman Nat. Gas PGB series Package unit for 6000'. I ordered the HA-02 Kit from a parts house and I received a box of jets for various altitudes with 1/4" jets after being assured by the Goodman Tech line that the kit would have the correct jets for my unit. The Kit I received has 1/4" threaded 5/8" long jets for a two stage unit which do not fit my two cell single stage unit, it takes the 1/8" thread, 1" long jets as in the current model series GMPH. Goodman Tech told me emphatically that this kit should have the smaller size jets in it even though the kit I received came directly from Goodman in Houston. HVACdirect whom I purchased the Kit from dumped me rudely after I e-mailed them about my problem. Any body out there got any Ideas where I can get the jets I need? The unit currently has #43 jets for 0 to 2000'. I think I need the #48 jets as it is only a single stage unit and that is what is recommended for the primary burner in a two stage unit for 6000' according to the paper work I received with the Goodman Kit.