mobilehomerepair.com

Good evening from Wisconsin

First time poster.
Just joined the forum today.
I have a feeling I'm gonna like this place.

I have a 1973 home.
Don't know what make or model.

I wonder if anyone has had to deal with the following issue and if so, can I ask how you handled it.

I have a pretty small bedroom with a bed that has one side right up against a heating\ac register.
There really isn't any place else the bed can sit.

I have attached a picture of what the register looks like.

Any ideas or suggestions would be greatly appreciated.

Thanks in advance for your time.

I'm not sure what your question is. Do you want to move the register? Modify the register?

Mark440 wrote: ↑Wed Aug 26, 2020 9:31 pm I'm not sure what your question is. Do you want to move the register? Modify the register?

Thanks for the reply Mark440

Currently, the heat (or AC) blows directly under the bed and gets trapped there.

Short of moving the register, I was trying to figure out what my options might be.

I searched Amazon and EBay for a product that I could attached to the existing register that might allow me to redirect the heat flow out from under the bed.
But could only find something for a floor vent (which of course I don't have.)

So, I was aking of anyone else had needed to do something similar and if so, how did they do it.