edge of gutter
Posted: Wed May 17, 2017 12:46 pm
Hi All!
The edge right at the overhang of the roof commonly called the J channel needs to be cleaned. The roof is rolled and the seal was applied to the edge/overhang as well. I am preparing the house for painting and want to clean that edge and seal it with an XIM product. Since the roof is rolled and some parts of the edge are worn away can I cut the excess away and seal the edge with XIM. The edge was rolled with a rubber product and I want to cut the worn areas and seal it for painting.
Is there a better idea or am I good to go.
oldtimer
The edge right at the overhang of the roof commonly called the J channel needs to be cleaned. The roof is rolled and the seal was applied to the edge/overhang as well. I am preparing the house for painting and want to clean that edge and seal it with an XIM product. Since the roof is rolled and some parts of the edge are worn away can I cut the excess away and seal the edge with XIM. The edge was rolled with a rubber product and I want to cut the worn areas and seal it for painting.
Is there a better idea or am I good to go.
oldtimer