Hi everyone,
Not sure where this should go but here's my question. A while back my wife got an antique electric fireplace off ebay. It worked ok at first then the steppermotor quit(the one for the flicker light), and not too long ago the fan motor quit. I ended up finding a fanmotor at an electronics surplus place., but the rpms are way too high. It's a shadedpole I believe and was wondering if there is a way I can put something in to lower the speed?
I was going to try dimmer switch at first but after doing a couple searches, it seems that may be ineffective to do what I want.
Btw there's not much info on the fireplace or the motor for that fact so I don't have any specs.
electric fireplace
Hi,
Not much I can give you on it as I'm not familiar with those.
However, the motor would need be a match in order to work safely and correctly.
I would try locating a local company that sells and services those type fireplace units.
Take care and best wishes,
Robert
Not much I can give you on it as I'm not familiar with those.
However, the motor would need be a match in order to work safely and correctly.
I would try locating a local company that sells and services those type fireplace units.
Take care and best wishes,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Removing fireplace in doublewide
by Twinparent924 » Thu Nov 08, 2018 10:53 pm » in Mobile Home Repair - 1 Replies
- 19689 Views
-
Last post by Greg
Fri Nov 09, 2018 7:38 pm
-
-
- 3 Replies
- 37082 Views
-
Last post by David DeBord
Sun Oct 22, 2017 8:16 am
-
-
Electric water heater, standard VS. MH specific
by ferret13sj » Thu Aug 26, 2021 3:41 am » in Mobile Home Repair - 4 Replies
- 48966 Views
-
Last post by Sulteric
Sun Sep 05, 2021 9:39 pm
-