Frustrating Fascia

Repair help for the do-it-yourselfer.
For mobile home parts, click here.

Moderators: Greg, Mark, mhrAJ333, JD

Post Reply
Posts: 9
Joined: Tue Apr 25, 2017 2:04 pm

Hi there, I am wanting to replace most of the fascia on my manufactured home (built in 94). The only problem is I can't for the life of me figure out what to replace it with. It's about 1/2" thick and 10" tall, dimensions which I can't find anywhere. Any advice?
Posts: 279
Joined: Tue Feb 26, 2008 8:33 am
Location: Anna, Tx

I have replaced my facia on the front and back sides. I pulled the old stuff off - and bared it all the way down to the rafter tails. Watch out for your drip edge !!

I screwed a 6x1 to the rafter tails, splicing boards between the tails as needed. Then I ripped lengths of LP SmartSide (without the grooves in it) to the width that I needed (6.25").

With the lumber "shortage" the stuff is going for better than $40 for a 4x8 sheet.
Post Reply
  • Similar Topics
    Last post