Washer not draining -- but no front door

Repair help for the do-it-yourselfer.
For mobile home parts, click here.

Moderators: Greg, Mark, mhrAJ333, JD

Locked
MizFurball2u
Posts: 17
Joined: Sat Jul 23, 2016 1:28 am

I went to put the washed clothes in the dryer. The washer stopped way full of water and I have a flood. I looked online to see what to do. I put the lid down and pushed the switch, got a hum. Is probably a clog in pump or hose. THE PROBLEM: Online tells me to remove the front panel, but there is no separate front panel. It is all one piece from front to back. Right now, I can't get it out cuz of all the water in it. Even empty, there is not much room to move it in the pantry. What do I do?
User avatar
Greg
Moderator
Posts: 5696
Joined: Wed Feb 28, 2007 8:01 pm
Location: Weedsport, NY

It looks like either a small pump or start bailing. get the flood cleaned up and get a fan or two going before major damage starts.

Greg
"If I can't fix it, I can screw it up so bad no one else can either."
MizFurball2u
Posts: 17
Joined: Sat Jul 23, 2016 1:28 am

Thanks, Greg. I used up a LOT of towels. They are currently hanging on the porch in the falling snow. LOL
MizFurball2u
Posts: 17
Joined: Sat Jul 23, 2016 1:28 am

I had my friend replace 3 parts that could all be culprit. Got 'em online, so didn't cost a fortune. Found instructions on removing the cabinet and replacing those parts and it now works perfectly.
Locked
  • Similar Topics
    Replies
    Views
    Last post