I have two floor jacks. My only hesitation on this job is the supporting of the wall. I want to make sure I will be supporting it properly. I've read to put a board on both floor jacks and use it to support a longer span across the floor joists. My concern however is the outer wall will sag once the rim joist is completely removed. There is only one board for the rim joist and the outer wall rests half way on the rim joist and half way on the ends of the floor joists. With the ends of the joists rotted along with the rim board my concern is the wall will sag for sure.
If anyone has any helpful information or tips to prevent a structural problem please share it. I have everything to do this job so I'm just looking for last minute advice. I've found I can never have enough knowledge about a job.
![Wink :wink:](./images/smilies/icon_wink.gif)