Hello from a new home in Northern Alberta.
This is my first manufactured home. Previously I had a "normal" home with an old furnace in the basement. The new home/furnace makes a fair bit more noise than the old one and I am having trouble getting used to the new M7RL045A.....especially sleeping.
I noticed the heat switch has four speed settings. The manual says the standard setting is the lowest but mine is set one notch higher, i.e. the second lowest. I was thinking of trying the lowest setting to gain a little more quiet but I understand there will be an increased heat differential across the burner which might cause issues, trip the limit switch etc. I want to try and measure this temperature difference directly but the manual is not clear on how to do this. It says measure "as close as possible" to the burner. Does this mean the closest register, or must I poke holes inside the furnace assembly tubings somewhere?
One other question.....is there a way to convert the M7RL045A such that it becomes a linear closed loop controlled system with an infinitely variable speed and the fan running constantly and slower? This way I would eventually tune out the noise, plus no cracks and pops from the duct work when it would otherwise shut off.
Quieting A Properly Working Intertherm M7RL045A
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 146316 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
- 1 Replies
- 31390 Views
-
Last post by Greg
Fri Apr 20, 2018 5:11 pm
-
-
intertherm standing pilot propane burner Heat Rise of 38°F spread.
by justplumducky » Fri Aug 25, 2017 10:06 am » in Nordyne Service & Repair - 0 Replies
- 44252 Views
-
Last post by justplumducky
Fri Aug 25, 2017 10:06 am
-
-
-
Intertherm standing pilot LPG burner 77 BTU IN gas valve mounting plate gets hot ( not warm).
by justplumducky » Sat Sep 09, 2017 3:34 am » in Nordyne Service & Repair - 1 Replies
- 62919 Views
-
Last post by Maxwell.lipphardt
Thu Nov 22, 2018 10:15 am
-
-
-
Intertherm outdoor a/c unit, blower not turning off. Model unknown rating plate is faded out.
by tkrueger » Sat May 05, 2018 8:57 pm » in Nordyne Service & Repair - 0 Replies
- 102407 Views
-
Last post by tkrueger
Sat May 05, 2018 8:57 pm
-