Miller M1MB, added heat pump fan speed too high
Working on a switching out an AC to a heat pump. It's a Miller M1MB 56k BTU Gas with a 2.5 ton heat pump now on it. Before it was just AC. When it calls for the heat pump the fan speed is running high like it does cooling. When it is switched to call for backup gas heat the fan speed runs correct. Anybody have a wiring diagram or some input on this would be great.
2009 Skyline Sunwood Premier 14 x 80
okay brain fart saturday there was one on the inside of the service door. but it doesn't really give me much info as far as speed adjustments. below is a pic of the terminals. from right to left the 1st black wire is on "COOL", the 2nd Orange is on "HEAT", the it goes L1 & XERM.
I have a Blue & Red wire left tied up coming from the fan. So again the fan issue is only when the heat is being called for the Heat Pump.
I have a Blue & Red wire left tied up coming from the fan. So again the fan issue is only when the heat is being called for the Heat Pump.
2009 Skyline Sunwood Premier 14 x 80
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 114176 Views
-
Last post by mobtek
Fri Mar 26, 2021 10:30 am
-
-
have intertherm heat pump with a 913421 control box tying to a miller 841 thermo stat ,
by hillcat01 » Mon Oct 21, 2019 7:28 pm » in Nordyne Service & Repair - 0 Replies
- 82909 Views
-
Last post by hillcat01
Mon Oct 21, 2019 7:28 pm
-
-
-
Emergency (Aux) Heat comes on W/O being called too
by istvv4848 » Mon Oct 22, 2018 11:21 am » in Nordyne Service & Repair - 0 Replies
- 47157 Views
-
Last post by istvv4848
Mon Oct 22, 2018 11:21 am
-
-
-
Eb12eb Coleman furnace 4 speed help.
by Johnwayne892000 » Thu Aug 30, 2018 7:37 pm » in Coleman Service & Repair - 0 Replies
- 23203 Views
-
Last post by Johnwayne892000
Thu Aug 30, 2018 7:37 pm
-
-
- 0 Replies
- 39531 Views
-
Last post by David DeBord
Sun Oct 22, 2017 7:13 am