I have an Intertherm (1987)15Kw electric furnace, problem is I cannot find a model or serial # on this unit. What do I do? QUESTION: With ampmeter on coils, when furnace starts power to coil and fan start same time, when shuts down power to coils and fan off at same time . I believe what I need is the sequencer. Thanx for any help
Gord
Intertherm ID
Hi Gord,
Data sticker should be on lower electrical component panel cover. WITH a call for heat from t-stat, you should have 240vac across each element coil after about 30/45 seconds.
Test end terminals on white ceramic insulators.
Sequencer is most common problem.
Thanks,
Robert
Data sticker should be on lower electrical component panel cover. WITH a call for heat from t-stat, you should have 240vac across each element coil after about 30/45 seconds.
Test end terminals on white ceramic insulators.
Sequencer is most common problem.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
intertherm standing pilot propane burner Heat Rise of 38°F spread.
by justplumducky » Fri Aug 25, 2017 10:06 am » in Nordyne Service & Repair - 0 Replies
- 50279 Views
-
Last post by justplumducky
Fri Aug 25, 2017 10:06 am
-
-
-
Intertherm standing pilot LPG burner 77 BTU IN gas valve mounting plate gets hot ( not warm).
by justplumducky » Sat Sep 09, 2017 3:34 am » in Nordyne Service & Repair - 1 Replies
- 69410 Views
-
Last post by Maxwell.lipphardt
Thu Nov 22, 2018 10:15 am
-
-
-
Intertherm outdoor a/c unit, blower not turning off. Model unknown rating plate is faded out.
by tkrueger » Sat May 05, 2018 8:57 pm » in Nordyne Service & Repair - 0 Replies
- 109907 Views
-
Last post by tkrueger
Sat May 05, 2018 8:57 pm
-
-
- 0 Replies
- 74230 Views
-
Last post by newguy47
Thu Aug 16, 2018 8:21 pm
-
-
heater blower intertherm feh-015ha-03
by newguy47 » Wed Oct 24, 2018 8:04 am » in Nordyne Service & Repair - 0 Replies
- 80558 Views
-
Last post by newguy47
Wed Oct 24, 2018 8:04 am
-