When the heat is turned on the elements heat up but the fan does not come on. From reading other posts I think it is the sequencer, but do not know which one I need for my model number.
thanks,
Matthew
INTERTHERM E1EB-020HA
- flcruising
- Posts: 606
- Joined: Mon Dec 03, 2007 2:18 pm
- Location: Florida Panhandle
Have you tested for voltage at the fan relay or sequencer to confirm? That's where I'd start.
Here's a simply troublshoot guide you could do on the sequencer.
http://www.arnoldservice.com/electric_h ... _parts.htm
Here's a simply troublshoot guide you could do on the sequencer.
http://www.arnoldservice.com/electric_h ... _parts.htm
[color=blue]Aaron[/color]
Hi,
Sequencer # 621381 and Sequencer # 621696 .
Both can be seen and ordered through PayPal from this page :
http://www.mobilehomerepair.com/NordyneElec.html
Thanks for inquiring,
Robert
Sequencer # 621381 and Sequencer # 621696 .
Both can be seen and ordered through PayPal from this page :
http://www.mobilehomerepair.com/NordyneElec.html
Thanks for inquiring,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
intertherm standing pilot propane burner Heat Rise of 38°F spread.
by justplumducky » Fri Aug 25, 2017 10:06 am » in Nordyne Service & Repair - 0 Replies
- 45819 Views
-
Last post by justplumducky
Fri Aug 25, 2017 10:06 am
-
-
-
Intertherm standing pilot LPG burner 77 BTU IN gas valve mounting plate gets hot ( not warm).
by justplumducky » Sat Sep 09, 2017 3:34 am » in Nordyne Service & Repair - 1 Replies
- 64616 Views
-
Last post by Maxwell.lipphardt
Thu Nov 22, 2018 10:15 am
-
-
-
Intertherm outdoor a/c unit, blower not turning off. Model unknown rating plate is faded out.
by tkrueger » Sat May 05, 2018 8:57 pm » in Nordyne Service & Repair - 0 Replies
- 104412 Views
-
Last post by tkrueger
Sat May 05, 2018 8:57 pm
-
-
- 0 Replies
- 70865 Views
-
Last post by newguy47
Thu Aug 16, 2018 8:21 pm
-
-
heater blower intertherm feh-015ha-03
by newguy47 » Wed Oct 24, 2018 8:04 am » in Nordyne Service & Repair - 0 Replies
- 77242 Views
-
Last post by newguy47
Wed Oct 24, 2018 8:04 am
-