Sub Floors and vapor barrier

Repair help for the do-it-yourselfer.
For mobile home parts, click here.

Moderators: Greg, Mark, mhrAJ333, JD

Post Reply
aapowell
Posts: 1
Joined: Wed Oct 23, 2019 12:19 pm

Wed Oct 23, 2019 6:15 pm

Hi folks,
I need to have soft spots in the floors repaired. I also need a vapor barrier. I can't afford to have both done at the same time. So, which should I have done first, or does it matter?
Appreciate all answers.
Thanks
Alice


Mark440
Posts: 220
Joined: Tue Feb 26, 2008 8:33 am
Location: Anna, Tx

Wed Oct 23, 2019 11:06 pm

Definitely get a vapor barrier down so to stop any further damage. Also, check the belly to be sure it is in good condition. Just a heads up - depending on how moist it has been under there - you may have some mold/mildew issues to contend with. Good luck!
Opportunity has a shelf life.

User avatar
Greg
Moderator
Posts: 5619
Joined: Wed Feb 28, 2007 8:01 pm
Location: Weedsport, NY
Contact:

Thu Oct 24, 2019 6:50 pm

I think I would take care of the soft spots first and find out why they are soft. It you have leakage, take care of that problem then get things sealed up.
If you have particle board subfloors replace the bad spots with plywood or at the very least OSB.

Greg
"If I can't fix it, I can screw it up so bad no one else can either."

Post Reply