Best way to cut holes on VOG walls?

Repair help for the do-it-yourselfer.
For mobile home parts, click here.

Moderators: Greg, Mark, mhrAJ333, JD

Locked
diskman01
Posts: 1
Joined: Sun Oct 26, 2014 3:25 pm

Sun Nov 16, 2014 10:34 pm

I'm adding network outlets to the rooms in my 1994 Schult DW. Been butchering the gypsum board when adding the new outlets and such. What it the best way to cut the rectangular holes for the new boxes besides the utility knife??


ponch37300
Posts: 622
Joined: Tue Nov 11, 2008 6:12 pm
Location: wisconsin

Mon Nov 17, 2014 10:28 am

Are you using a rectangle plastic box in the wall for the plates to screw to? A keyhole saw works great in drywall. They are 5-10 bucks at the store. You can find them in the drywall section. Otherwise there are a bunch of power tools that will get the job done. Rotozip, dremel, oscillating multi tool, etc.

jimncheryl
Posts: 52
Joined: Fri Dec 20, 2013 1:12 pm

Mon Nov 17, 2014 10:56 am

I vote for an oscillating multi tool, around $ 20.00 harbor freight to $100 plus elsewhere , less mess easier to control .

User avatar
JeffInFL
Posts: 171
Joined: Wed Apr 24, 2013 6:52 am

Mon Nov 17, 2014 12:57 pm

I bought this thing from Harbor Freight:

http://www.harborfreight.com/electric-c ... 42831.html

It gets the job done, but is very messy and doesn't cut very straight unless you put some muscle into keeping it under control. You end up with drywall dust everywhere .. it got to the point where my g/f would run the shop vac and hold the hose a few inches away from where I was cutting.

I found it much easier just to use a drywall saw:

http://www.harborfreight.com/6-inch-dou ... 66611.html

jimncheryl
Posts: 52
Joined: Fri Dec 20, 2013 1:12 pm

Mon Nov 17, 2014 2:26 pm

This makes nice clean cuts in drywall, little mess, easy to control, plus has many other uses.

http://www.harborfreight.com/oscillatin ... -8493.html


User avatar
Greg
Moderator
Posts: 5688
Joined: Wed Feb 28, 2007 8:01 pm
Location: Weedsport, NY
Contact:

Mon Nov 17, 2014 8:24 pm

For just a few, a drywall saw is the cheapest & easiest.

Greg
"If I can't fix it, I can screw it up so bad no one else can either."

jimncheryl
Posts: 52
Joined: Fri Dec 20, 2013 1:12 pm

Tue Nov 18, 2014 8:58 am

Cutting blind holes in an existing wall could be dangerous , unless you know for sure there are no wires behind the wall. The stroke needed on a drywall saw could be a problem. H.F currently has the oscillating multi tool on sale for about $16.00. The depth of the cut is controllable, the other plus it has many more uses.

Locked