New Furnace roof vent
Posted: Tue Nov 17, 2009 10:15 am
We recently had a new high efficiency furnace installed. The installer vented the furnace through the old chimney/roof jack. He took off the cap off the old roof jack, ran the pvc pipes up and cut a piece of sheet metal to place over the pipes and bent the edges over the existing jack, then sealed around the pipes with some orange sealant. It probably works fine, but it looks horrible. The pipes look like they are just floating out of the old roof jack and I think they are much taller than needed - 3 ft++ over roof level (need 1 foot above expected snow level??) My question is, is there some type of cap to place over the old roof jack that has holes for the 2 pvc pipes, and is there some type of rubber boot or something to seal around the pipes??