Furnace conversion

Questions about repairs and parts for other brands of furnaces and air conditioners. Please note that our speciality is Coleman and Nordyne products, so our knowledge of other brands may be limited.

Moderators: Greg, Mark

Locked
twistednkrazy

I am converting a natural gas Miller MGC-80 to lp. What are the parts I need for this and where can I find them? Also any help on how to do the change over would be great. On the furnace it says lp conversion orifice is included but that has been long gone as I am not the original owner and there is no manual.
Top
User avatar
Yanita
Moderator
Posts: 3369
Joined: Sat Feb 17, 2007 10:16 pm
Location: Eastern N. Carolina

Hi,

Welcome to the site.

I am going to move your post to the HVAC forums. Please read the posting tips there to make sure you have included as much info as the tech might need.

Merry Christmas,
Yanita
The difference between success and failure is who gives up first!
Top
User avatar
Robert
Moderator
Posts: 6413
Joined: Wed Feb 28, 2007 12:07 am
Location: Tennessee

Hi,

LP Burner Orifice # 661041 @ $9.00 + $4.50 shipping.


Change orifice, convert gas valve by removing conversion stem, invert and replace. Will change from showing NG or NAT GAS to LP.


Have hvac tech or gas company change gas pressure after installing LP tank and regulator.


Inspect cycle and adjust burner flame if needed.


Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Top
Locked
  • Similar Topics
    Replies
    Views
    Last post

Return to “Service & Repair of Other Brands”