MGH-055-ABWN-06 central a/c gas furnace motor needed

Questions about repairs and parts for Nordyne furnaces, air conditioners and heat pumps for manufactured homes including Intertherm, Mac and Miller brands. Click here for Nordyne parts.

Moderators: Greg, Mark

Locked
homebuff
Posts: 325
Joined: Sun Mar 18, 2007 8:38 am
Location: sallisaw, okla. 74955
Contact:

Robert or Mark!
The specs for the motor are as follows:
KA55HXSMW-2346 HP 1/3 Volt 115 HZ60 Amp 5.0 PH 1 RPM 1075/3spd
Didn't see one in the motor column listing where you purchase furnace part's.
Did see one that had the white plug connector that looks like mine that goes into the control relay box.
I want to purchase the generic brand like the one I purchased some years back that cost me $99.00.
Making a strange noise & don't want it to go out getting so close to hot weather.
My wife has Fibro & is a diebetic & can't afford to be stuck in this house in hot conditions.
The one thats in it now is the one my stepson installed for me & is a 3/4 hp.
It is too much hp & rpm for my Intertherm unit.
It merely blows too much air out in the winter time using the gas unit.
I don't use the furnace anymore because of that.
We use 4 electric heaters.
Two are radiant oil type & the other two are coiled filament type.
Eating us up on our electric bill.
Now its getting summer time so not too big a thing.
Time to get a new one again.
Thank's for helping me get the correct one
Mark or Robert!
Brent
I am a certified ford diesel tech, "Retired Now" Ford Parts Department counter man, computer consultant, repairman & programmer
User avatar
Greg
Moderator
Posts: 5696
Joined: Wed Feb 28, 2007 8:01 pm
Location: Weedsport, NY

You are better off giveing Mark a call at the store, 605-229-2627.

Greg
"If I can't fix it, I can screw it up so bad no one else can either."
homebuff
Posts: 325
Joined: Sun Mar 18, 2007 8:38 am
Location: sallisaw, okla. 74955
Contact:

Thank's Greg!
Will do! :D
I am a certified ford diesel tech, "Retired Now" Ford Parts Department counter man, computer consultant, repairman & programmer
Locked
  • Similar Topics
    Replies
    Views
    Last post