A couple Intertherm Issues
Posted: Sun Nov 27, 2011 2:32 pm
Intertherm E2EH-012HA
The Sequencer has or is tanking on me I think. I can tap it and one of two Heating elements come on but soon after go off. Also both elements kick in for a few seconds then the blower comes on. I have found what Looks just like the one I have located here
http://www.mobilehomerepair.com/NordyneElec.php
5th one down on the left Part number 01-0842 Sequencer. Now with that said my furnace is only using the larger Sequencer on that plate. Nothing is connected to the smaller one.
I gathered some part numbers off of the old one and will list them as I found them
On the plate the two sequencers are mounted to there was
15SH41
On the Larger (2 Pole??) Sequencer I found T-0-D 14SH22 H24V
I just need the one sequencer best I can tell instead of the two mounted on the plate as I only utilized the one.
Edit: Cleaned up post with other questions as I found the answeres by digging around here.
The Sequencer has or is tanking on me I think. I can tap it and one of two Heating elements come on but soon after go off. Also both elements kick in for a few seconds then the blower comes on. I have found what Looks just like the one I have located here
http://www.mobilehomerepair.com/NordyneElec.php
5th one down on the left Part number 01-0842 Sequencer. Now with that said my furnace is only using the larger Sequencer on that plate. Nothing is connected to the smaller one.
I gathered some part numbers off of the old one and will list them as I found them
On the plate the two sequencers are mounted to there was
15SH41
On the Larger (2 Pole??) Sequencer I found T-0-D 14SH22 H24V
I just need the one sequencer best I can tell instead of the two mounted on the plate as I only utilized the one.
Edit: Cleaned up post with other questions as I found the answeres by digging around here.