Nordyne E2EB-012HA
Posted: Tue Nov 22, 2011 12:15 pm
Greetings, so glad I've found this forum anyway to my question.
I have a Nordyne E2EB-012HA furnace that I'm having a problem with. From the research I've done I suspect that the culprit is the sequencer. The problem is that when the furnace is on with the blower off I hear a clicking noise every 30-60 seconds and I can feel heat coming from the unit as if one or more of the heating elements are on.
In my research I came up with the part number which I beleieve to be 621678.
I'm not a very mechanical person but switching out the sequencer does not seem to me to be that hard of a DIY project but before I start if I could get some help as to where the sequencer is located on my particular unit. I take it it would be behind one of the two panels below the blower?
Any help would be greatly appreciated. Thank you in advance.
Jim N.
I have a Nordyne E2EB-012HA furnace that I'm having a problem with. From the research I've done I suspect that the culprit is the sequencer. The problem is that when the furnace is on with the blower off I hear a clicking noise every 30-60 seconds and I can feel heat coming from the unit as if one or more of the heating elements are on.
In my research I came up with the part number which I beleieve to be 621678.
I'm not a very mechanical person but switching out the sequencer does not seem to me to be that hard of a DIY project but before I start if I could get some help as to where the sequencer is located on my particular unit. I take it it would be behind one of the two panels below the blower?
Any help would be greatly appreciated. Thank you in advance.
Jim N.
Am I wrong in thinking this may be a tad bit on the high side?