conversion from natural gas to LP MGHA-056ABFC-01
Posted: Fri Nov 04, 2011 10:15 am
I am converting my Nordyne furnace to LP gas. I did the conversions and lit the pilot. The burner did not come on at first and then I turned on the fan switch just under the blower. The burner lit. It took the heater a while to come on but it only stayed on for a couple of minutes. It was coming on and off every 2 minutes so I shut it off. What needs to be done? I also think the pilot and burner are way too high. How do I adjust that?