conversion from natural gas to LP MGHA-056ABFC-01

Questions about repairs and parts for Nordyne furnaces, air conditioners and heat pumps for manufactured homes including Intertherm, Mac and Miller brands. Click here for Nordyne parts.

Moderators: Greg, Mark

Locked
wdearman
Posts: 1
Joined: Fri Nov 04, 2011 10:08 am

I am converting my Nordyne furnace to LP gas. I did the conversions and lit the pilot. The burner did not come on at first and then I turned on the fan switch just under the blower. The burner lit. It took the heater a while to come on but it only stayed on for a couple of minutes. It was coming on and off every 2 minutes so I shut it off. What needs to be done? I also think the pilot and burner are way too high. How do I adjust that?
Top
User avatar
Mark
Site Admin
Posts: 742
Joined: Sat Feb 17, 2007 4:23 pm
Location: Aberdeen, SD
Contact:
Contact Mark

The burner would not light nor the fan would not come up normally?
You can't fail if you don't try!
Top
Locked
  • Similar Topics
    Replies
    Views
    Last post

Return to “Nordyne Service & Repair”