Major problems with E1EH1-015A
Posted: Mon Oct 03, 2011 2:34 pm
A couple of months ago on a cool morning I turned on my heater, and noticed a burning smell. I opened the top access panel and could see flames on the top element. I called a HVAC repair man who told me that he could stop by in a couple of days.
To make a long story short since I needed air more than I did heat, I unhooked the wires leading from the sequencers and timers to the elements. I had no problems with the air as it was working great.
Repairman came I explained about the removed wires (I used wire markers on each end). He removed the elements and saw that they were burned so bad they were falling apart. So he took the part numbers and hopefully ordered all the right parts.
When he started installing parts he informed me that he would only wire up what he was removing. After installing all new parts nothing would work. No heat, no air, the fan motor would not even come on.
Since he removed all my wire markers for the elements to the timers and sequencers can you tell me roughly which terminals they go on?
I have wiring Diagrams but terminal numbers are not shown.
To make a long story short since I needed air more than I did heat, I unhooked the wires leading from the sequencers and timers to the elements. I had no problems with the air as it was working great.
Repairman came I explained about the removed wires (I used wire markers on each end). He removed the elements and saw that they were burned so bad they were falling apart. So he took the part numbers and hopefully ordered all the right parts.
When he started installing parts he informed me that he would only wire up what he was removing. After installing all new parts nothing would work. No heat, no air, the fan motor would not even come on.
Since he removed all my wire markers for the elements to the timers and sequencers can you tell me roughly which terminals they go on?
I have wiring Diagrams but terminal numbers are not shown.