mobilehomerepair.com

I have an intertherm gas furnace, the blower motor is having some issues. When the thermostat demands heat from the furnace it kicks on and works as it should.

But when the house is warm, warmer than the thermostat asks, it will not cycle the air. It used to do this but it has stopped doing it. Any ideas.
im having issues finding a diagram for this furnace model #g5rao72c-12.

thanks

We need to move your topic to the Nordyne Service & Repair forum. Here's a link. https://www.mobilehomerepair.com/phpbb/viewforum.php?f=2

Sounds as though it may have a limit switch concern.
Has happened to my simiiar model in the past & fixed it.
Good luck!

homebuff wrote: Sounds as though it may have a limit switch concern.
Has happened to my simiiar model in the past & fixed it.
Good luck!

Need to know what type of thermostat your using as well.
Standard or digital programmable or non-programmable.