Page 1 of 1

Nordyne-Intertherm furnace MMHB-070ABHR-06 not lighting

Posted: Thu Sep 08, 2011 7:53 am
by jschulz70
My intertherm furnace model MMHB-070ABHR-06 won't light. The red light on the curcuit box is blinking twice.

Re: Nordyne-Intertherm furnace MMHB-070ABHR-06 not lighting

Posted: Mon Sep 12, 2011 8:47 pm
by Bill
Hi and Welcome,
I am not able to find a code light manual for your furnace. So i was wondering if you can look and see if anywhere on your furnace or furnace doors that there is a trouble code chart. If not then at what point does your furnace begin to fail. Here is a link on the basic operation of a furnace. This will be helpful in figuring out when your furnace fails to start.
http://www.youtube.com/user/pexring#p/a/u/2/dO5_wuCWFqA
Hope this helps
Bill

Re: Nordyne-Intertherm furnace MMHB-070ABHR-06 not lighting

Posted: Tue Sep 20, 2011 12:37 pm
by cactys
Was this issue resolved? I'm having the same problem with a Nordyne/Intertherm MMHB-070ABHR-06 furnace with a UTC 1018-204 controller. The controller clicks once after about 30 seconds and then repeatedly flashes the diagnostic light two times. I have replaced the ignitor but it's still doing the same thing. Any advice will be appreciated. Thanks!