E2EH-015H,017H

Questions about repairs and parts for Nordyne furnaces, air conditioners and heat pumps for manufactured homes including Intertherm, Mac and Miller brands. Click here for Nordyne parts.

Moderators: Greg, Mark

Locked
rtalley45
Posts: 3
Joined: Thu Aug 18, 2011 11:13 pm

Hi all,

I am in the process of trying to re-wire a Nordye mobile home system bearing "E2EH-015H, 017H." I have found a place to purchase the wiring harness kit from, but they sell two kits...
one for E2EH-015HA and one for E2EH-015HB. I was wondering if anyone knew how to tell which one I have since the sticker doesn't state A or B? Thanks in advance.

Rich
Bill
Moderator
Posts: 100
Joined: Mon Mar 07, 2011 9:32 pm

Hi Rich and welcome,
This is what i found out about your model #. At the beginning of the model # is E2EH that means that your unit is a heat only furnace. At the end of the model # is an HA or HB. The difference is the HA is A/C ready and the HB is model revision replacement. So since your unit is an E2EH I would say the correct model number for your unit is E2EH-015HB. Now if it does turn out that you have A/C we will have to revisit this.
Thanks and hope this helps
Bill
Please remember to check and change your filters.
rtalley45
Posts: 3
Joined: Thu Aug 18, 2011 11:13 pm

Bill,

Thanks for the reply. It is a mobile home unit. Definitely has a/c. The problem I'm having is that the drip pan drain line got clogged and the condensate drip pan overflowed onto the heating coils and breaker area. Some of the wires melted and an Uncle of mine, replaced what he thought needed to be replaced. Then, my Brother replaced the blower motor because it wouldn't work. I replaced the circuit board because I determined that it got some damage too. Now, when you apply power to the unit (flip the breaker on), and turn the blower switch on the thermostat to on, the compressor unit (outside) comes on, and the relay on the new circuit board clicks (once), but the blower still doesn't circulate any air. I know the motor works because I wired it direct to the breaker and it worked just fine. I believe the problem to be in the wiring, so I wanted to just order a replacement wiring kit. BUT, the problem is that the supplier of the wiring kit has two models... one for a E2EH-015HA and one for a E2EH-015HB. I am just trying to determine which one I need for the unit I have. Thanks.
Bill
Moderator
Posts: 100
Joined: Mon Mar 07, 2011 9:32 pm

Hi Rich,
Well i am not sure how to tell what model furnace you have soooooo. Here is a web site that has the manual for both model's.
http://www.hvacmanuals.com/store/storefront.php
You can down load both manuals. This way you will be able to look at the wiring diagram for each type and figure out what is your model.
I hope this helps.
Bill
Please remember to check and change your filters.
rtalley45
Posts: 3
Joined: Thu Aug 18, 2011 11:13 pm

Thanks for the help. I figured it out. I ended up not ordering a wiring kit, I just used the wiring diagram and re-wired the whole thing. It works like new now. I also discovered that the whole model number was on the back of one of the metal covers. I just overlooked it.
ghostBlace119
Posts: 3
Joined: Sat Oct 08, 2011 9:26 pm

Hi Rich and welcome,
This is what i found out about your model #. At the beginning of the model # is E2EH that means that your unit is a heat only furnace. At the end of the model # is an HA or HB. The difference is the HA is A/C ready and the HB is model revision replacement. So since your unit is an E2EH I would say the correct model number for your unit is E2EH-015HB. Now if it does turn out that you have A/C we will have to revisit this.
Thanks and hope this helps
_________________
Image
One evening I drove my husband's car to the shopping mall.
On my return, I noticed that how dusty the outside of his car was and cleaned it up a bit.When I finally entered the house, I

called out."The woman who loves you the most in the world just cleaned your headlights and windshield."
My husband looked up and said, "Mom's here?"
buy wow gold
Runescape Gold
Buy Maple Story Mesos
Locked