Nordyne Furnace/AC unit Yellow Flashing Light

Questions about repairs and parts for Nordyne furnaces, air conditioners and heat pumps for manufactured homes including Intertherm, Mac and Miller brands. Click here for Nordyne parts.

Moderators: Greg, Mark

Locked
andycgardner
Posts: 2
Joined: Tue Jan 11, 2011 7:27 pm

Hi,

I have a Nordyne Furnace/AC unit with a yellow flashing light. Code reads 'weak LED flame'. When the furnace turns on it seems to take twice as long as normal. You can hear it click almost like flame is lighting but it continues to run then it clicks again and the flame lights, blower comes on as normal but the yellow light keeps flashing until it turns off. The flame doesn't appear to be weak at all. Any ideas?

Model
M1MB070ABW

Unit is going on 11 years old. had ignitor replaced 2 years ago and just had the inducer motor and pressure switch connection replaced a month ago.

Thanks,
Andy
Top
User avatar
Robert
Moderator
Posts: 6413
Joined: Wed Feb 28, 2007 12:07 am
Location: Tennessee

Hi Andy,

Inspect the burner orifice/spud behind the gas valve leading to burner tube. Be sure it is not clogged (spider-web-bug).



Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Top
andycgardner
Posts: 2
Joined: Tue Jan 11, 2011 7:27 pm

I checked and it is not clogged/blocked. Any other suggestions? It seems to be working fine other than the light flashing and it taking 2 times to ignite. Flame doesn't appear weak, heat is blowing fine.
Top
User avatar
Robert
Moderator
Posts: 6413
Joined: Wed Feb 28, 2007 12:07 am
Location: Tennessee

Hi,

Would need an hvac tech to do further testing to diagnose any problems within the cycle operation.

Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Top
Locked
  • Similar Topics
    Replies
    Views
    Last post

Return to “Nordyne Service & Repair”