Intertherm defrost problem

Questions about repairs and parts for Nordyne furnaces, air conditioners and heat pumps for manufactured homes including Intertherm, Mac and Miller brands. Click here for Nordyne parts.

Moderators: Greg, Mark

Locked
shag4fun
Posts: 1
Joined: Sat Jan 08, 2011 1:29 pm

I have an Intertherm T3QC-030k series that has been frosting up. Nothing too deep but it isn't going into defrost mode. I had the unit serviced this summer and the technician filled it up with refrigerant. I opened the shroud and looked at the board and can see the 30 60 and 90 pins on the board as well as the jumper on the black wire which is attached just above those three sets of pins. That black wire is on pins ABC TBT. Should it be on one of those sets of pins instead?
Top
User avatar
Robert
Moderator
Posts: 6413
Joined: Wed Feb 28, 2007 12:07 am
Location: Tennessee

Hi,

The black wire should be on either the 30, 60 or 90 pin. That is time between defrost cycles.


Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Top
Locked
  • Similar Topics
    Replies
    Views
    Last post

Return to “Nordyne Service & Repair”