Just ordered and received new capacitor p/n 622133 and not sure if it is polorized. Don't see any markings anywhere on it. Is this just put leads on any of two terminals.
furnace is Nordyne-Miller m1mb 077a. Also is the blower assembly heavy? It looks like it has to be removed to get at area to replace capacitor.
start capacitor for blower motor
Hi,
One wire on each side, doesn't matter which. Not too heavy, disconnect wire connector, removes screws from bottom side flanges and slide out carefully.
If you have a/c, be careful to not cut or break refrigerant lines as you slide it out.
Thanks,
Robert
One wire on each side, doesn't matter which. Not too heavy, disconnect wire connector, removes screws from bottom side flanges and slide out carefully.
If you have a/c, be careful to not cut or break refrigerant lines as you slide it out.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 49371 Views
-
Last post by jazsimpson
Sat Jul 08, 2017 8:16 am
-
- 0 Replies
- 22348 Views
-
Last post by Tonystark
Fri Dec 07, 2018 12:30 pm
-
- 14 Replies
- 157773 Views
-
Last post by Greg
Tue Sep 26, 2017 1:00 pm
-
-
3500A816 Randomly wont start or shut down
by Smithcraft » Fri Jan 13, 2023 4:04 pm » in Coleman Service & Repair - 0 Replies
- 80211 Views
-
Last post by Smithcraft
Fri Jan 13, 2023 4:04 pm
-
-
-
Need advice on blower
by NorthTexasSafariGuy » Mon Jul 31, 2017 9:18 am » in Coleman Service & Repair - 0 Replies
- 60779 Views
-
Last post by NorthTexasSafariGuy
Mon Jul 31, 2017 9:18 am
-