InterTherm E2EB-012HA problems

Questions about repairs and parts for Nordyne furnaces, air conditioners and heat pumps for manufactured homes including Intertherm, Mac and Miller brands. Click here for Nordyne parts.

Moderators: Greg, Mark

Locked
sephiek

the problem with my intertherm unit is that. with the thermostat
controls set to auto and the cool or heat selector switch set to the off position, the heating elements are still active and heating, the
elements will turn off when i shut down the breakers inside the unit, but when i turn the breakers on the heating elements turn on to... if i set the controles to heat and to the auto possion, i can run the temp setting up above room temp and the fan and heat will work ok. but as soon as the room temp gets to the set possion, the fan will turn off but the heating elements will not.
Top
User avatar
hvac1000
Posts: 292
Joined: Wed Feb 28, 2007 9:19 am
Location: Cincinnati ohio

Sounds like a defective heat sequencer.
God, grant me the serenity
to accept the things I cannot change;
the courage to change the things I can;
and the wisdom to know the difference.
Top
User avatar
Robert
Moderator
Posts: 6413
Joined: Wed Feb 28, 2007 12:07 am
Location: Tennessee

Hi,

From your statements it is most likely the sequencer.



Sequencer # 621679 @ $35 + $6.75 shipping .


It can be seen and ordered from right side through PayPal here:

http://www.mobilehomerepair.com/NordyneElec.html



OR, by calling toll free between 9 and 5 CST week-days to

1-877-263-7860 and charging to Visa or Mastercard.


If in Canada, let us know for added info if ordering.



Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Top
Locked
  • Similar Topics
    Replies
    Views
    Last post

Return to “Nordyne Service & Repair”