Coleman
model 7975c856
75k btu input
I have been having a few problems with my blower.Sometimes it will kick on for a second or two and then shut off.It does this even when there is no call for heat.It is intermitent.
Now it has a bigger problem.The furnace will call for heat burner comes on,then when the fan should come on it doesn't.Then the upper resetable limit kicks out.I shut it down and let it cool off reset the limit.When this happens the fan is real hotter and actually seems froze up.I have to let it cool some before I can turn the cage.
I have also lost the ability to turn the fan switch from auto to ON and have the fan run.It only works in the auto setting.I will have to get a meter out and do some tracing.
I am afraid I might be having a fan motor on its way out.Looking for anyother reasons for what might be causing these problems so I can repair them.
blower fan not coming on and other issues
I just pulled the fan assembly out.The motor shaft is definatly tighter than it should be.I pulled the motor apart and blew it out.I can see some were on the shaft and bushings.No scoring just wear.I cleaned and packed the bushings with high temp synthetic grease.
Cleaned the whole blower housing and reinstalled.fan now seems to turn more freely than before.I still think I will be looking into a new fan motor.
I will have to see what it does after it heat soaks a few times to see if it will come on like it should instead of just getting hot and freezing up.
Cleaned the whole blower housing and reinstalled.fan now seems to turn more freely than before.I still think I will be looking into a new fan motor.
I will have to see what it does after it heat soaks a few times to see if it will come on like it should instead of just getting hot and freezing up.
RObert,
Here's an update on the fan.It still does the come on for a second or two and shut off cycling issue.There seems to be no pattern when it does it either.
As far as it freezing up when the burner kicks on and the furnace get hot,it is working good.No more issues with it freezing up with heat from the furnace so far.
I will have to still figure out why the fan will not work when the fan switch is set to the "ON" position.I also am not sure what is causing the cycling of the fan motor whenever it wants to.
Atleast for now it is working good.
Here's an update on the fan.It still does the come on for a second or two and shut off cycling issue.There seems to be no pattern when it does it either.
As far as it freezing up when the burner kicks on and the furnace get hot,it is working good.No more issues with it freezing up with heat from the furnace so far.
I will have to still figure out why the fan will not work when the fan switch is set to the "ON" position.I also am not sure what is causing the cycling of the fan motor whenever it wants to.
Atleast for now it is working good.
Hi,
You'll have to use a meter and wiring diagram and trace test the components in the circuit to see what is opening or closing when it shouldn't.
Thanks,
Robert
You'll have to use a meter and wiring diagram and trace test the components in the circuit to see what is opening or closing when it shouldn't.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Thanks Robert,
Y eah I will have to get my fluke out and run down the wiring to see what i can find out.I hope that maybe i can check into it this weekend to see why its cycles like that everynow then.When I get that done I will update my post.
Y eah I will have to get my fluke out and run down the wiring to see what i can find out.I hope that maybe i can check into it this weekend to see why its cycles like that everynow then.When I get that done I will update my post.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 139409 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
-
New to the Forum - Wood Stove Backing, Walls, and Other Qs
by simpleword » Wed Apr 26, 2017 3:40 pm » in Mobile Home Repair - 4 Replies
- 62848 Views
-
Last post by yakima4$
Sat May 06, 2017 4:04 pm
-
-
-
Ceiling repair and a few other questions
by CajunCowboy654 » Mon Dec 06, 2021 8:13 pm » in Mobile Home Repair - 0 Replies
- 90863 Views
-
Last post by CajunCowboy654
Mon Dec 06, 2021 8:13 pm
-
-
- 0 Replies
- 54595 Views
-
Last post by Chevy357
Wed Nov 13, 2019 7:47 pm
-
-
New Deck and Porch coming (photos included)
by vilmel2vilmel2 » Mon Jul 17, 2017 5:58 pm » in Mobile Home Repair - 4 Replies
- 37259 Views
-
Last post by vilmel2vilmel2
Wed Aug 02, 2017 10:29 am
-